Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.
OUR MISSION
True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.
OUR VALUES
- Be the offset. We create asymmetric advantages with creativity and ingenuity.
- What would it take? We challenge assumptions to deliver ambitious results.
- It’s the people. Our team is our competitive advantage and we are better together.
YOUR MISSION
True Anomaly is seeking an experienced Electrical Engineer to design and develop electrical system architectures for our next-generation space vehicles. You will be responsible for defining system-level electrical architectures, performing system reliability analysis, and ensuring seamless integration of power, data, and control systems across the spacecraft. Working at the intersection of hardware design and systems engineering, you will translate mission requirements into robust electrical system solutions that meet performance, reliability, and mass constraints for space flight operations. This role emphasizes systems-level thinking — understanding how electrical subsystems interact and ensuring the overall architecture meets mission needs.
RESPONSIBILITIES
- Develop electrical system architectures and block diagrams for spacecraft avionics, including power distribution networks, grounding schemes, and signal routing topologies
- Create and maintain system-level block diagrams, functional flow diagrams, and architecture documentation to communicate design intent across engineering teams
- Conduct Failure Mode and Effects Analysis (FMEA) for electrical systems to identify potential failure modes, assess risk, and drive design improvements
- Review and evaluate electrical components, parts, and COTS products to ensure they meet mission requirements, reliability standards, and environmental specifications
- Perform component selection and qualification planning including evaluation of radiation tolerance, temperature range, voltage margins, and derating requirements
- Develop electrical interface requirements and specifications for avionics components including flight computers, sensors, actuators, and communication systems
- Perform electrical system analysis including power budgets, voltage drop calculations, fault analysis, and load flow studies to ensure system performance and reliability
- Design custom avionics hardware including power conditioning units, motor controllers, sensor interface boards, and data acquisition systems for space applications
- Create detailed electrical schematics, BOMs, and design documentation using industry-standard CAD tools (Altium, OrCAD, or similar)
- Conduct worst-case circuit analysis, derating studies, and reliability assessments to ensure designs meet space qualification requirements
- Define and manage electrical interfaces between subsystems including mechanical mounting, thermal management, and electromagnetic compatibility
- Develop and execute test plans for electrical system verification including functional testing, environmental qualification, and EMI/EMC testing
- Support hardware bring-up, debugging, and troubleshooting using lab equipment (oscilloscopes, power supplies, multimeters, logic analyzers)
- Collaborate with harness design teams to define cable routing, connector specifications, and wire gauge requirements
- Perform trade studies on component selection, architecture alternatives, and design approaches to optimize system performance, reliability, and cost
- Support integration and test activities including spacecraft-level electrical checkout, continuity testing, and flight readiness verification
- Participate in design reviews (SRR, PDR, CDR) presenting electrical architecture, block diagrams, FMEA results, analysis, and verification status
- Create and maintain electrical system documentation including ICDs, architecture diagrams, test procedures, analysis reports, and as-built drawings
QUALIFICATIONS
- Bachelor's degree in Electrical Engineering or related technical field
- 5–10 years of professional experience in electrical system design, preferably in aerospace, defense, or high-reliability applications
- Strong fundamentals in circuit design, power electronics, and electrical system architecture
- Experience conducting system-level reliability analysis including FMEA, fault tree analysis, or similar methodologies
- Proficiency creating system architecture diagrams, block diagrams, and technical documentation using tools such as Visio, Lucidchart, or similar
- Demonstrated ability to evaluate and select electrical components based on mission requirements, environmental specifications, and reliability criteria
- Proficiency with electrical CAD tools for schematic capture and PCB layout (Altium, OrCAD, EAGLE, or similar)
- Experience with electrical analysis including circuit simulation (SPICE), power budget analysis, and worst-case analysis
- Hands-on experience with hardware debugging and test equipment (oscilloscopes, multimeters, power supplies, signal generators)
- Understanding of aerospace electrical standards including wire derating, connector selection, and EMI/EMC design practices
- Strong analytical and problem-solving skills with attention to detail in design and documentation
- Excellent communication skills with ability to present technical concepts to multidisciplinary teams
PREFERRED SKILLS AND EXPERIENCE
- Master's degree in Electrical Engineering or related discipline
- Experience with spacecraft electrical systems including EPS, flight computers, motor control, or sensor systems
- Familiarity with space-grade components, radiation effects, and qualification testing (vibration, thermal-vacuum, life testing)
- Experience with high-voltage systems, battery management, or solar array design
- Knowledge of digital communication protocols used in spacecraft (CAN, SpaceWire, MIL-STD-1553, RS-422, SPI, I2C)
- Experience with MATLAB, Python, or similar tools for electrical system modeling and analysis
- Understanding of FPGA or embedded processor interfaces and digital logic design
- Familiarity with NASA or MIL standards (NASA-STD-8739, MIL-STD-461, MIL-STD-1540) and aerospace quality practices
- Experience with requirements management and systems engineering processes
- Background in signal integrity, power integrity, or high-speed digital design
- Experience working with government or defense customers on space or launch vehicle programs
PHYSICAL DEMANDS
This position is based at our primary development facility and involves both office-based design work and hands-on lab activities. Work includes extended periods at a computer workstation for design and analysis, as well as time in the lab and cleanroom environments for hardware testing and integration. Physical requirements include the ability to lift equipment up to 35 lbs, bend and reach during hardware assembly and testing, and operate hand tools and test equipment. Occasional travel to supplier facilities, test sites, or launch operations may be required. Work schedule may include extended hours during critical hardware delivery and test campaigns.
COMPENSATION
- Base Salary: $135,000-$250,000
- Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.
ADDITIONAL REQUIREMENTS
- Ability to maintain or obtain TS//SCI clearance
- Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
- Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
- Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.
This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us.
Skills Required
- Bachelor's degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or related field
- 5-10 years of professional experience in systems engineering, avionics engineering, or a related technical discipline
- Demonstrated experience with requirements decomposition, flow-down, and traceability management for electrical or avionics systems
- Experience developing and managing interface control documents across complex, multi-discipline hardware programs
- Strong electrical engineering fundamentals with the ability to engage credibly with engineers across EPS, RF communications, digital systems, FPGA, and harness disciplines
- Exceptional written and verbal communication skills, with demonstrated ability to convey technical information clearly to both engineering and program management audiences
True Anomaly Compensation & Benefits Highlights
-
Healthcare Strength — Company and third-party materials describe 100% employer-sponsored medical, dental, and vision coverage, with HSA/FSA options noted in postings. This points to robust core healthcare support as part of total rewards.
-
Equity Value & Accessibility — Equity or stock options are consistently included in offers alongside cash compensation. Ownership is framed as a standard component of the package across roles.
-
Leave & Time Off Breadth — Public materials cite generous PTO, paid holidays, and parental leave, with some profiles noting around 25 days of PTO for full-time employees. This breadth signals meaningful paid time away in addition to holidays.
True Anomaly Insights
What We Do
Space was once the quietest place in the universe. Now, it's crowded, contested, and confrontational. We are True Anomaly: the only defense company focused exclusively on space defense. Founded in 2022 by ex-U.S. Space Force members, True Anomaly designs and builds advanced systems for space superiority: agile and powerful spacecraft platforms, mission software engineered for unmatched command and control, and payloads tailored for precision sensing and effects. True Anomaly is headquartered in Centennial, CO, with regional offices in Colorado Springs, CO, Long Beach, CA, and Washington, D.C. We are hiring and seeking exceptional talent to join True Anomaly, from any technical industry or background, to bring unique talents, perspective, and solutions. If you embrace complexity, lead instead of follow, showcase integrity over ego, take ownership for outcomes, and measure success by impact, we want to hear from you.
Why Work With Us
True Anomaly exists to enable a secure, stable, and sustainable space environment for the US, its allies, and partners. We design and build spacecraft and software solutions for space superiority. If you are ready to contribute to the future of space defense, we’d love to hear from you.
Gallery
True Anomaly Offices
Hybrid Workspace
Employees engage in a combination of remote and on-site work.
We are a hybrid office culture. Our employees work from offices in Denver, Colorado Springs, Los Angeles, and Washington D.C. We recognize the importance of in-office collaboration, but also the value of a flexible work and location requirements
