Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.
OUR MISSION
True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.
OUR VALUES
- Be the offset. We create asymmetric advantages with creativity and ingenuity.
- What would it take? We challenge assumptions to deliver ambitious results.
- It’s the people. Our team is our competitive advantage and we are better together.
YOUR MISSION
We are seeking highly motivated Data and Control Systems Test Engineers to design, build, and operate the instrumentation, data acquisition, and test control systems that enable spacecraft testing. You will work closely with test engineers across all disciplines to define instrumentation requirements, develop data acquisition architectures, design and implement automated test control systems, and deliver high-quality test data for engineering analysis. In this role, you will architect DAQ systems for complex test campaigns, develop test automation and sequencing software, commission and calibrate instrumentation, troubleshoot hardware and software integration issues, and ensure test data integrity and traceability. This position offers an excellent opportunity to build mission-critical test infrastructure in a fast-paced, hands-on environment.
RESPONSIBILITIES
- Design and implement data acquisition systems for propulsion, fluids, mechanical, avionics, and environmental test campaigns including sensor selection, signal conditioning, and DAQ hardware architecture.
- Develop automated test control and sequencing software using LabVIEW, Python, MATLAB, or similar platforms to enable safe, repeatable, and efficient test execution.
- Define instrumentation requirements and sensor layouts in collaboration with test engineers to ensure full test objective coverage and requirements traceability.
- Commission, calibrate, and validate instrumentation and DAQ systems prior to test campaigns, including end-to-end checkout and uncertainty analysis.
- Develop real-time monitoring displays, safety interlocks, and automated abort logic for hazardous test operations.
- Perform post-test data processing, analysis, and visualization to support engineering disposition and requirements verification.
- Troubleshoot DAQ hardware, instrumentation, control system software, and network connectivity issues during test operations.
- Establish and maintain data management processes including file naming conventions, metadata standards, archival procedures, and configuration control for test data.
- Interface with avionics, software, and systems engineering teams to integrate spacecraft telemetry and command interfaces into ground test systems.
QUALIFICATIONS
- Bachelor's degree in electrical, computer, aerospace, mechanical engineering, computer science, or related technical discipline.
- Years of relevant experience in data acquisition, test automation, instrumentation, or control systems engineering for aerospace, defense, or high-reliability test environments in line with engineering level.
- Hands-on experience with data acquisition hardware (National Instruments, Keysight, HBM,etc.) and software platforms (LabVIEW, MATLAB, Python)
- Strong programming skills in at least one language commonly used for test automation(Python, LabVIEW, MATLAB, C/C++).
- Working knowledge of instrumentation including pressure transducers, thermocouples, load cells, strain gauges, accelerometers, and flow meters.
- Experience with signal conditioning, analog and digital I/O, and measurement uncertainty analysis.
- Strong troubleshooting skills for hardware and software integration issues in test environments.
- Excellent communication and collaboration skills with ability to work across multidisciplinary test teams.
- U.S. Citizenship required due to government contracts.
PREFERRED SKILLS AND EXPERIENCE
- Master's degree in electrical, computer, or aerospace engineering.
- Experience with real-time control systems, PLC programming, or embedded systems development.
- Familiarity with spacecraft avionics interfaces, telemetry protocols, and command and data handling systems.
- Experience with high-speed data acquisition, video synchronization, or distributed DAQ architectures.
- Knowledge of Ethernet-based instrumentation protocols (Modbus TCP, EtherCAT, PROFINET).
- Experience with version control (Git), continuous integration, and software development best practices for test systems.
- Familiarity with hazardous test operations including propulsion testing, high-pressure systems, or environmental chambers.
- Experience with test data analysis tools and visualization platforms (Grafana, Tableau, custom dashboards).
- Background in systems engineering, requirements verification, or test planning.
- Active Secret or Top Secret clearance.
COMPENSATION AND BENEFITS
Base Salary:
- Test Engineer 3: $125,000-$155,000
- Senior Test Engineer: $140,000-$175,000
Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.
ADDITIONAL REQUIREMENTS
- Work Location— this a fully onsite position based out of our Long Beach, CA office.
- Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
- Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.
This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us.
Skills Required
- Bachelor's degree in electrical, computer, aerospace, mechanical engineering, computer science, or related technical discipline.
- Relevant experience in data acquisition, test automation, instrumentation, or control systems engineering in aerospace, defense, or high-reliability test environments.
- Hands-on experience with data acquisition hardware (National Instruments, Keysight, HBM) and DAQ hardware architecture.
- Experience with software platforms for test systems (LabVIEW, MATLAB, Python).
- Strong programming skills in at least one test automation language (Python, LabVIEW, MATLAB, C/C++).
- Working knowledge of instrumentation (pressure transducers, thermocouples, load cells, strain gauges, accelerometers, flow meters).
- Experience with signal conditioning, analog and digital I/O, and measurement uncertainty analysis.
- Strong troubleshooting skills for hardware and software integration in test environments.
- Excellent communication and collaboration skills to work across multidisciplinary test teams.
- U.S. Citizenship (required for government contracts/ITAR compliance).
True Anomaly Compensation & Benefits Highlights
-
Healthcare Strength — Healthcare is described as 100% employer-sponsored and comprehensive, including medical, dental, and vision. Options such as HSA/HRA are also referenced, reinforcing strong core coverage.
-
Equity Value & Accessibility — Equity is a standard part of the package, positioning employees to share in company ownership. Company and job materials consistently include stock options alongside cash compensation.
-
Leave & Time Off Breadth — Materials highlight generous time off and paid holidays, with references to flexible time off/PTO. Generous parental leave is also cited, complemented by an onsite mother’s room.
True Anomaly Insights
What We Do
Space was once the quietest place in the universe. Now, it's crowded, contested, and confrontational. We are True Anomaly: the only defense company focused exclusively on space defense. Founded in 2022 by ex-U.S. Space Force members, True Anomaly designs and builds advanced systems for space superiority: agile and powerful spacecraft platforms, mission software engineered for unmatched command and control, and payloads tailored for precision sensing and effects. True Anomaly is headquartered in Centennial, CO, with regional offices in Colorado Springs, CO, Long Beach, CA, and Washington, D.C. We are hiring and seeking exceptional talent to join True Anomaly, from any technical industry or background, to bring unique talents, perspective, and solutions. If you embrace complexity, lead instead of follow, showcase integrity over ego, take ownership for outcomes, and measure success by impact, we want to hear from you.
Why Work With Us
True Anomaly exists to enable a secure, stable, and sustainable space environment for the US, its allies, and partners. We design and build spacecraft and software solutions for space superiority. If you are ready to contribute to the future of space defense, we’d love to hear from you.
Gallery
True Anomaly Offices
Hybrid Workspace
Employees engage in a combination of remote and on-site work.
We are a hybrid office culture. Our employees work from offices in Denver, Colorado Springs, Los Angeles, and Washington D.C. We recognize the importance of in-office collaboration, but also the value of a flexible work and location requirements
