Summary/Objective
The Product Engineer supports Engineering by controlling product design information and documentation. The Product Engineer is responsible for designing and developing new and existing products, validating equipment, and purchased product/material, and data collection with respect to applications and field use. This position involves design and prototyping of new products through coordination with Sales and Engineering staff for customer expectations and requirements. The Product Engineer will support Process Improvement and Corrective Actions as needed. Assists in developing and documenting procedures, work instructions, and flow charts. Provides technical support and expertise. Has an intimate relationship with existing products, product development and improvement, and product support.
Essential Functions
- Design of new products and prototyping.
- Product design and development, production development.
- Document and Design Control.
- Assists in the calibration and validation of equipment, operation of equipment to perform testing and the collection of data.
- Creating and maintaining part numbers and descriptions, part masters, and processing Engineering Change Notices
- Perform research and development of product with respect to application and field use.
- Aid in Quality improvement and development.
- Interface with Supply Chain and Manufacturing to ensure products and specifications are in accordance with approved processes, procedures and collected data.
- Assist in resolutions of failures, corrective actions, and preventative actions.
- Ability to work in a team environment to perform, diagnose, complete and document results, develop fixtures, test product, and develop processes and procedures.
- Assist Quality Assurance in product inspection, development of procedures and processes, conducting tests and collecting data.
- Assists in the continuous improvement efforts, including production processes and layout.
- Analyzes and collects data, prepares procedures and processes, trains personnel and documents training.
- Assists in the verification and implementation of equipment.
- Other duties as assigned.
Work Environment
Work is generally performed in an office environment with controlled heating and air, with standard office equipment available. The performance of this position may occasionally require exposure to the manufacturing areas, which may require the use of personal protective equipment such as safety glasses with side shields and hearing protection.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Refer to detailed Physical Requirements document.
Supervisory Responsibilities
This position has no supervisory responsibilities.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Equal Opportunity Employer Veterans/Disabled
All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, sex, gender identity, age, marital status, genetic information, sexual orientation, national origin, disability (including pregnancy), veteran status, or any other characteristic protected by state, federal, or local law.
Physical demands sometimes describe the customary method of achieving an essential function. Physical demands may, in some instances, be accomplished using other methods.
PHYSICAL DEMANDS
Never/Rarely <1%
Occasional 1-33%
Frequent 34-66%
Continuous 67-100%
Lift/Carry
1 to 10 lbs.
X
11 to 20 lbs.
X
21 to 50 lbs.
X
51 to 75 lbs.
X
76 to 100 lbs.
X
Push/Pull
1 to 10 lbs.
X
11 to 20 lbs.
X
21 to 50 lbs.
X
51 to 75 lbs.
X
76 to 100 lbs.
X
Balancing
X
Bend/Stoop/Twist
X
Crouch/Squat
X
Kneel/Crawl
X
Reaching Front
X
Reach Above Shoulders
X
Reach Below Shoulders
X
Sitting
X
Standing
X
Twisting
X
Walking
X
Hearing
X
Speech
X
Vision
X
Repetitive Arm Use
X
Repetitive Wrist Use
X
Repetitive Hand Use
X
Grasping
X
Squeezing
X
Sensation/Touch
X
Head Movement
X
Climb Stairs/Ladder
X
EQUIPMENT USE & OPERATION
Never/Rarely <1%
Occasional 1-33%
Frequent 34-66%
Continuous 67-100%
Motor Vehicle
X
Forklift
X
Lawn Equipment
X
Using Hand or Power Tools
X
Operate Foot Pedals
X
ENVIRONMENTAL CONDITIONS
Never/Rarely <1%
Occasional 1-33%
Frequent 34-66%
Continuous 67-100%
Exposure to electrical hazards
X
Work in cramped spaces
X
Exposure to dust/smoke
X
Exposure to fumes/odors/grease/oil
X
Works in hot/cold temperatures
X
Travel required
X
Works inside
X
Works outside
X
Exposure to noise
X
Exposure to chemicals
X
Stand on concrete
X
Vibration
X
Exposure to toxic materials
X
Works at unprotected heights
X
Walk on uneven or slippery surface
X
Works in wet conditions
X
Works with others
X
Works alone
X
Works with moving machinery
X
MENTAL DEMANDS
Never/Rarely <1%
Occasional 1-33%
Frequent 34-66%
Continuous 67-100%
Problem solving
X
Analytical ability
X
Communication – oral
X
Communication – written
X
Money handling
X
Organization
X
Interpersonal skills
X
Calculating
X
Concentration
X
Perception
X
Creativity
X
Work with interruptions
X
DEXTERITY REQUIREMENTS
Never/Rarely <1%
Occasional 1-33%
Frequent 34-66%
Continuous 67-100%
Eye/hand coordination
X
Fine manipulation (keying, writing, picking, pinching)
X
Handling (holding, grasping)
X
Wrist motion (repetitive flexion/rotation)
X
Qualifications
Qualifications
- Must be authorized to work in the U.S. without sponsorship.
Educations and Experience
- BA/BS in an Engineering discipline, Mechanical or Materials preferred, or related technical degree or experience
- 2 or more years in a technical or quality capacity preferably in a manufacturing or production setting.
- Experienced in the creation of procedures and processes.
- Experienced in the development of manufacturing fixtures.
- Experience in manufacturing and design.
Skills and Competencies
- Highly organized.
- Excellent communication skills in the English language both written and oral.
- Technical or mechanical aptitude.
- Ability to perform detailed tasks with accuracy.
- Self-motivated; ability to work independently.
- Strong working knowledge of computer applications including Word, Excel, flow charting and design software.
- Must have advanced math skills.
- Advanced knowledge of technical drawings and design.
- Technical Writing ability.
Skills Required
- Authorization to work in the United States without sponsorship
- BA or BS in an engineering discipline, preferably Mechanical or Materials Engineering, or a related technical degree or equivalent experience
- At least 2 years of experience in a technical or quality capacity, preferably in manufacturing or production
- Experience creating procedures and processes
- Experience developing manufacturing fixtures
- Experience in manufacturing and design
- Strong working knowledge of Word, Excel, flowcharting, and design software
- Advanced math skills
- Advanced knowledge of technical drawings and design
- Technical writing ability
- Excellent written and oral English communication skills
What We Do
ANCORP is a family-owned U.S. manufacturer specializing in high and ultra-high vacuum components, chambers, and valves since 1965. They serve researchers and manufacturers in industries such as aerospace, semiconductor, and defense, providing both standard hardware and custom-engineered fabrications to support scientific and technological advancements.
