Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.
OUR MISSION
True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.
OUR VALUES
- Be the offset. We create asymmetric advantages with creativity and ingenuity.
- What would it take? We challenge assumptions to deliver ambitious results.
- It’s the people. Our team is our competitive advantage and we are better together.
YOUR MISSION
Lead the design, development, and delivery of electrical ground support equipment across a program portfolio, setting the technical standard for how we build, scale, and sustain our test infrastructure. You will own rack and enclosure systems from concept through first article, drive standardization across the EGSE portfolio, and serve as a technical anchor for a growing team of engineers and technicians.
RESPONSIBILITIES
- Own end-to-end design and delivery of EGSE racks and test enclosures — mechanical layout, electrical schematics, harness design, and full drawing packages from requirements through first article build and check-out
- Lead harness design and fabrication to MIL-spec standards, including connector selection, shielding strategy, crimp inspection, and backshell installation, and define build quality standards for the broader team
- Establish and enforce rack standardization across programs — component selection, parts inventory strategy, and procurement approach to maximize build speed and minimize single-point-of-failure dependencies
- Drive signal integrity and power architecture decisions at the rack and enclosure level, including power and data routing, grounding, shielding, and EMI mitigation
- Develop hardware-in-the-loop (HIL) test system architecture and expansion across both emulator-based and flight hardware configurations
- Provide hands-on technical support during test campaigns and bring-up activities, including on-site support at production and test facilities
- Mentor mid-level engineers and technicians, serving as a technical backstop and escalation point for the team
- Develop and maintain thorough documentation for all GSE designs, processes, and changes to ensure traceability and reduce team dependency on any single individual
BASIC QUALIFICATIONS
- B.S. in Mechanical, Electrical, Aerospace Engineering, or comparable discipline
- Hands-on experience in EGSE, test systems, or hardware engineering in aerospace, defense, or adjacent high-reliability industries and skill equivalent to engineering level
- Demonstrated experience designing and building harnesses, including crimping, connector inspection, backshell installation, and shielding termination
- Strong proficiency in both mechanical and electrical hardware design — comfortable owning the 3D layout and the schematic for the same system
- Rack-level power and data architecture experience — UPS, lab-grade power supplies, Linux-based control systems, and mixed signal/power environments
- Systematic troubleshooting methodology across power and data systems
- Familiarity with common communication protocols (e.g. Ethernet, RS-232, RS-422, RS-485, CAN, I2C, SPI, EtherCAT) and how to support their signal integrity, grounding, and shielding
- Proficiency with electrical test equipment including oscilloscopes, DMMs, electronic loads, function generators, and bench power supplies
PREFERRED QUALIFICATIONS
- Aerospace or startup experience — both preferred
- Experience designing or supporting hardware-in-the-loop (HIL) test systems
- Mechanical or Electrical CAD experience (e.g. SolidWorks, Altium) including rack layout and schematic capture
- PCB design exposure and understanding of layout principles as they relate to signal integrity
- Test software familiarity (e.g. Python, C++) sufficient to collaborate effectively with software engineers
- PCB and harness rework experience
COMPENSATION
- Base Salary:
- Senior Engineer: $150,000-$220,000
- Staff Engineer: $160,000-$250,000
- Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave
- Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.
- ADDITIONAL REQUIREMENTS
- Work Location—this a fully onsite position based out of our Long Beach, CA office.
- Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
- Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.
- This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us.
Skills Required
- B.S. in Mechanical, Electrical, Aerospace Engineering, or comparable discipline
- Hands-on experience in EGSE, test systems, or hardware engineering in aerospace, defense, or adjacent high‑reliability industries
- Demonstrated experience designing and building harnesses (crimping, connector inspection, backshell installation, shielding termination)
- Proficiency in mechanical and electrical hardware design (3D layout and schematic ownership)
- Rack-level power and data architecture experience (UPS, lab power supplies, Linux-based control systems, mixed signal/power environments)
- Systematic troubleshooting methodology across power and data systems
- Familiarity with common communication protocols and supporting signal integrity, grounding, and shielding (Ethernet, RS-232, RS-422, RS-485, CAN, I2C, SPI, EtherCAT)
- Proficiency with electrical test equipment (oscilloscopes, DMMs, electronic loads, function generators, bench power supplies)
- Ability to provide hands-on technical support during test campaigns and on-site at production/test facilities
- Must be fully onsite in Long Beach, CA
- Must meet U.S. Government export control eligibility (U.S. citizen, lawful permanent resident, protected individual, or eligible to obtain required authorizations)
- Aerospace or startup experience
- Experience designing or supporting hardware‑in‑the‑loop (HIL) test systems
- Mechanical or electrical CAD experience (e.g., SolidWorks, Altium) including rack layout and schematic capture
- PCB design exposure and understanding of layout principles related to signal integrity
- Familiarity with test software to collaborate with software engineers (Python, C++)
- PCB and harness rework experience
True Anomaly Compensation & Benefits Highlights
-
Healthcare Strength — Public materials indicate 100% employer‑sponsored healthcare, including medical, dental, and vision, with HSA/HRA options highlighted as part of the core package.
-
Leave & Time Off Breadth — Careers content and listings emphasize generous PTO and paid holidays, presenting time away from work as a meaningful component of total rewards.
-
Parental & Family Support — Sources describe generous parental leave and on‑site support such as a Mother’s Room, signaling attention to family needs.
True Anomaly Insights
What We Do
Space was once the quietest place in the universe. Now, it's crowded, contested, and confrontational. We are True Anomaly: the only defense company focused exclusively on space defense. Founded in 2022 by ex-U.S. Space Force members, True Anomaly designs and builds advanced systems for space superiority: agile and powerful spacecraft platforms, mission software engineered for unmatched command and control, and payloads tailored for precision sensing and effects. True Anomaly is headquartered in Centennial, CO, with regional offices in Colorado Springs, CO, Long Beach, CA, and Washington, D.C. We are hiring and seeking exceptional talent to join True Anomaly, from any technical industry or background, to bring unique talents, perspective, and solutions. If you embrace complexity, lead instead of follow, showcase integrity over ego, take ownership for outcomes, and measure success by impact, we want to hear from you.
Why Work With Us
True Anomaly exists to enable a secure, stable, and sustainable space environment for the US, its allies, and partners. We design and build spacecraft and software solutions for space superiority. If you are ready to contribute to the future of space defense, we’d love to hear from you.
Gallery
True Anomaly Offices
Hybrid Workspace
Employees engage in a combination of remote and on-site work.
We are a hybrid office culture. Our employees work from offices in Denver, Colorado Springs, Los Angeles, and Washington D.C. We recognize the importance of in-office collaboration, but also the value of a flexible work and location requirements
