System Engineer - Protective System Senior Engineer

Posted 15 Days Ago
Be an Early Applicant
Space Center, FL
7+ Years Experience
Security • Cybersecurity
The Role
The System Engineer will support the design, operations, installation, and maintenance of traffic control, access control, and radio communication systems at Kennedy Space Center. Responsibilities include technical guidance, maintenance management, system problem investigation, and readiness assessments for equipment and systems.
Summary Generated by Built In

Company Conformance Statement

In the performance of their respective tasks and duties all employees are required to conform to the following:

  • Perform quality work within deadlines with or without direct supervision.
  • Interact professionally with other employees, customers, and suppliers.
  • Work independently while understanding the necessity for communicating and coordinating work efforts with other employees and organizations.

Employees are required to:

  • Comply with all applicable safety and health-related rules, regulations, and procedures.
  • Work safely themselves and help their teammates work safely.
  • Assist supervisors and other managers in identifying and mitigating potentially hazardous conditions.
  • Help the organization maintain a safe and healthy workplace. 

Purpose and Scope

Protective System Engineering position to perform a variety of traffic control systems, access control systems and radio communication systems. Engineering assignments will be made to support project development, design, operations, installation, and maintenance of these systems. These systems are located at the Kennedy Space Center – at locations throughout the site, including at/around space flight hardware processing facilities, launch pad support buildings and facilities, engineering and administrative support buildings and other types of industrial and related support facilities. 

Job Duties and Essential Responsibilities

System Specific

Possess strong working knowledge of Traffic Control devices. Possess strong working knowledge of Lenel access control devices is preferred. Perform a range of design development, analysis, or review tasks without supervision and works on complex issues where analysis of situations or data requires an in-depth evaluation of variable factors. Stay up to date with emerging technologies and industry trends related to mechanical engineering and mentors less experienced engineers. Provide onsite technical guidance as needed for new or existing equipment installation and/or modifications that require mechanical engineer expertise and exercises judgment in selecting methods, techniques, and evaluation criteria to come to a solution.

Maintenance

Revise and add new asset information in Maximo database for assigned equipment per MAR (Maintenance Action Request) process. Develop and maintain job plans and PMs for assigned equipment in accordance with launch and processing operations, NASA-STD-5008B and industry standard requirements. Address and justify preventive maintenance deferrals of assigned equipment. Conduct site visits to investigate system problems, propose solutions and provide recommendations to restore systems. Support shop technicians in troubleshooting issues related to assigned equipment as needed. Provide and review technical expertise for technical anomalies as they arise. Resolve and document failure anomalies regarding assigned equipment. Prepare and review Technical Anomaly reports and presentations documenting problems, concerns, and resolutions for assigned equipment to the Engineering Review Board.

Readiness

Develop and present or represent mission related presentations to the NASA and/or EGS customer as required to present support readiness or failure concerns. Perform readiness assessments of assigned equipment and systems.

Project Support

Coordinate and work closely with requester, customers, other engineering, logistics, financial, and program management disciplines to define system specifications and requirements. Direct interface and liaison with internal and external customers at all levels from concept to final design and commissioning activities, design reviews and technical working group meetings to comply with requirements and specifications. Support development of technical proposals, statements of work and/or provide comments on the technical content and level of effort of the proposed scope of work. Develop task order requirements to NASA to complete Operations & Maintenance Documentation (OMD) updates per specific, contracted timeframes. OMD updates could be on drawings or job plans for assigned equipment/systems. Coordinate and communicate effectively with CAD drafters, Design Engineers, or shop personnel by written or verbal means. Perform all other position related duties as assigned or requested.

Education and Experience Requirements

Bachelor’s degree in Electrical Engineering or related scientific field with 10+ years of job-related experience and have passed the Fundamentals of Engineering test or Master’s degree in Electrical Engineering or related scientific field with 8+ years of job-related experience and have passed the Fundamentals of Engineering test and/or 16+ years relevant experience with no 4-year degree. IMSA level 2 traffic control certification is preferred. If not currently possessed, it shall be required to obtained within 6 months from date of hire. Lenel Certified professional, LCP, is preferred. If not currently possessed, it shall be required to obtained within 6 months from date of hire. Good communication and analytical skills. Knowledge of industry standard computer software for the position (i.e. CADD, AutoCAD, MicroStation, SKM, ETAP, PLC interface software, etc.). Working Knowledge of PLC control logic diagrams preferred. Has a wide-range of experience and uses professional concepts and company objectives to resolve complex issues in creative and effective ways.

Preferred Qualifications:

May require some limited travel. May require the ability to pass and maintain a Security Clearance.

Required Minimum Position Knowledge, Skills, and Abilities:

  • Ability to exercise sound judgement and reason.
  • Strong ability to use data and analysis to make fast data-driven decisions.
  • Capable of using spreadsheets, word processing and standard Microsoft Office software to include Excel, Word, PowerPoint and Visio.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals.
  • Ability to read and understand schematics & blueprints.
  • Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization.
  • Must possess general knowledge of office routines to include scheduling, general office administration, and a working knowledge of standard computer software.
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.

Other Requirements:

  • Must be a U.S. citizen and be able to obtain and maintain required Government clearances/badges as required by program and position
  • Must have the ability to communicate in English, both verbal and written in an effective manner.
  • Must have and maintain a valid driver’s license.

Work Environment, Physical Demands, and Mental Demands:

This position involves work typical of an office environment with no unusual hazards; occasional lifting to 20 pounds; constant sitting with use of computer terminal; constant use of sight abilities while reviewing documents; constant use of speech/hearing abilities for communication; constant mental alertness; must possess planning/organizing skills and must be able to work under deadlines. Field work will consist primarily of site walk downs in support of corrosion planning. Site hazard training and Personal Protective Equipment are provided.

Other Responsibilities:

  • Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.
  • Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the PSP Quality Policy and carry out job activities in compliance with applicable PSP Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
  • Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to their job.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters.

The Company
HQ: Germantown, MD
18,261 Employees
On-site Workplace

What We Do

Amentum is a premier global technical and engineering services partner supporting critical programs of national significance across defense, security, intelligence, energy, and environment. We draw from a century-old heritage of operational excellence, mission focus, and successful execution underpinned by a strong culture of safety and ethics. Headquartered in Germantown, Md., we employ more than 20,000 people in 48 states and 28 foreign countries and territories. Visit us at amentum.com to explore how we deliver excellence for our customers’ most vital missions.

Jobs at Similar Companies

Invoice Home Logo Invoice Home

Senior Cloud Engineer

Fintech • Information Technology • Mobile • Software • Financial Services • Cybersecurity • SEO
Remote
Texas, USA
20 Employees
200K-250K Annually

Silverfort Logo Silverfort

Marketing Analyst

Information Technology • Sales • Security • Cybersecurity • Automation
Remote
United States
357 Employees

MacPaw Logo MacPaw

Senior Product Designer (New Product)

Information Technology • Security • Software • Cybersecurity • App development • Data Privacy
Remote
Hybrid
Kyiv, Kiev, UKR
550 Employees

Similar Companies Hiring

Invoice Home Thumbnail
Software • SEO • Mobile • Information Technology • Fintech • Financial Services • Cybersecurity
Austin, TX
20 Employees
MacPaw Thumbnail
Software • Security • Information Technology • Data Privacy • Cybersecurity • App development
Cambridge, MA
550 Employees
Silverfort Thumbnail
Security • Sales • Information Technology • Cybersecurity • Automation
GB
357 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account