Senior Manufacturing Engineer

Posted 23 Minutes Ago
Be an Early Applicant
Alpharetta, GA, USA
In-Office
90K-110K Annually
Senior level
Industrial • Manufacturing
The Role
Leads complex manufacturing engineering projects at a heavy manufacturing and assembly facility. Responsibilities include process improvement, lean manufacturing, facility and line layouts, time and motion studies, production standards, automation evaluation, root-cause analysis, and capital equipment projects. The role partners cross-functionally to improve safety, quality, cost, reliability, and throughput while providing hands-on production-floor support.
Summary Generated by Built In

RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking an experienced candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer’s world-class engineering and manufacturing facility in Alpharetta, Georgia. 

This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. 

Senior Manufacturing Engineer 

Senior Manufacturing Engineer will serve as a senior technical expert for manufacturing engineering at a heavy manufacturing and assembly facility. This position will independently solve complex process, assembly, and plant-layout challenges; define production standards and methods; and lead high-impact technical projects from concept through implementation. The engineer will remain hands-on while partnering with production, maintenance, quality, safety, product engineering, supply chain, suppliers, and leadership to improve safety, quality, cost, reliability, and throughput. 

Job Responsibilities 

  • Lead complex technical projects involving process improvement, lean manufacturing, facility and line layouts, and capital equipment, including scope, budget, schedule, and risk. 
  • Perform time, motion, and methods studies to establish and maintain production rates, line balance, standard work, and efficient operating methods. 
  • Design and approve production-line layouts, workstation and fixture designs, setups, routings, and material-handling plans using Creo and Teamcenter. 
  • Lead kaizen events, value stream mapping, 5S, standard-work development, and error-proofing activities, and ensure improvements are sustained. 
  • Review worker logs, processing sheets, specification sheets, charts, graphs, and diagrams to verify compliance with quality and production standards. 
  • Analyze production and quality data to identify deviations from standards and recommend changes to methods, equipment layout, material handling, and quality or production standards. 
  • Perform advanced root-cause analysis on difficult process, equipment, and quality issues using structured problem-solving methods. 
  • Evaluate automation, collaborative robot, and new manufacturing technology opportunities and develop the supporting technical and business cases. 
  • Develop and review engineering sketches, drawings, blueprints, schematics, layouts, and computer-generated reports. 
  • Present technical recommendations, project status, risks, and business impacts to engineering and plant leadership. 
  • Work closely with production, maintenance, facilities, quality, safety, product engineering, supply chain, suppliers, and other cross-functional partners. 
  • Maintain a strong presence on the production floor for gemba walks, problem-solving, project execution, and implementation support. 

                          Job Requirements 

                          • Bachelor’s degree in manufacturing engineering, Industrial Engineering, Mechanical Engineering, or a related engineering discipline. 
                          • Ten or more years of full-time, hands-on manufacturing engineering experience, including technical leadership of complex projects. 
                          • Deep expertise in manufacturing and assembly process engineering, including lean manufacturing methods. 
                          • Expert-level experience with line layouts, production setups, workstation and fixture design, and manufacturing process design. 
                          • Professional experience using Creo and Teamcenter, or closely comparable CAD and product lifecycle management tools. 
                          • Experience with time and motion studies, line balancing, standard work, kaizen, value stream mapping, and 5S. 
                          • Expert ability to read and interpret blueprints, technical drawings, schematics, and engineering reports. 
                          • Experience managing technical projects that include budgets, schedules, risks, and implementation requirements. 
                          • Ability to manage multiple complex projects independently and influence cross-functional teams without direct authority. 
                          • Ability to work full time onsite in a fast-paced manufacturing environment and spend significant time on the production floor while following plant safety and PPE requirements. 

                          Preferred Qualifications 

                          • Lean Six Sigma Black Belt or Green Belt certification. 
                          • Experience specifying and implementing automation, collaborative robots, or other advanced manufacturing technologies. 
                          • Experience developing specifications and business cases for capital equipment. 
                          • Experience with advanced root-cause and quality tools, including 8D, 5 Why, PFMEA, and design of experiments (DOE). 
                          • Experience in engine, generator set, heavy equipment, or comparable complex-product assembly. 
                          • Experience sustaining manufacturing improvements after implementation. 
                          • Demonstrated ability to share technical knowledge with peers and serve as an escalation point for complex engineering issues. 

                          Visa sponsorship is not available for this position. 

                          Pay Range: $90,000 - $110,000 Commensurate with experience 

                          About RFA Engineering 

                          RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. 

                          Competitive Benefits 

                          • Health and Dental Insurance 
                          • TelaDoc Healthiest You 
                          • Supplemental Vision Insurance 
                          • Company Paid Life Insurance 
                          • Company Paid Long-Term Disability 
                          • Short-term Disability 
                          • Retirement Savings Account (Traditional 401k & Roth 401k) 
                          • Flexible Spending Plan Dependent Care 
                          • HSA for Medical Expenses 
                          • Bonus Plan (Exempt Employees Only) 
                          • Paid Time Off (PTO) 
                          • Paid Holidays 
                          • Bereavement Leave 
                          • Employee Assistance Programs (EAP) 
                          • Education Assistance 

                          Equal Opportunity and Veteran Friendly 

                          Qualifications Education Preferred Bachelors of Science or better. Bachelors of Science or better. Bachelors of Science or better. Equal Opportunity Employer
                          This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

                          Skills Required

                          • Bachelor’s degree in manufacturing engineering, industrial engineering, mechanical engineering, or a related engineering discipline
                          • Ten or more years of full-time, hands-on manufacturing engineering experience
                          • Technical leadership of complex manufacturing engineering projects
                          • Deep expertise in manufacturing and assembly process engineering, including lean manufacturing methods
                          • Expert experience with line layouts, production setups, workstation and fixture design, and manufacturing process design
                          • Professional experience using Creo and Teamcenter or comparable CAD and product lifecycle management tools
                          • Experience with time and motion studies, line balancing, standard work, kaizen, value stream mapping, and 5S
                          • Ability to read and interpret blueprints, technical drawings, schematics, and engineering reports
                          • Experience managing technical projects involving budgets, schedules, risks, and implementation
                          • Ability to independently manage multiple complex projects and influence cross-functional teams without direct authority
                          • Ability to work full time onsite in a fast-paced manufacturing environment and follow safety and PPE requirements
                          • Lean Six Sigma Black Belt or Green Belt certification
                          • Experience specifying and implementing automation, collaborative robots, or advanced manufacturing technologies
                          • Experience developing specifications and business cases for capital equipment
                          • Experience with 8D, 5 Why, PFMEA, and design of experiments
                          • Experience with engine, generator set, heavy equipment, or comparable complex-product assembly
                          • Experience sustaining manufacturing improvements after implementation
                          • Ability to share technical knowledge and serve as an escalation point for complex engineering issues
                          Am I A Good Fit?
                          beta
                          Get Personalized Job Insights.
                          Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

                          The Company
                          HQ: Eden Prairie, MN
                          438 Employees
                          Year Founded: 1961

                          What We Do

                          RFA serves 100's of clients ranging in size from Fortune 500 to entrepreneurial start-ups. We deliver engineering services from our Engineering Center in Eden Prairie, MN and at our client’s own facilities. Regardless of the manner which we deliver services, our goal is to please our clients, through consistent value of services which are aligned to the standards of our clients. We strive to work as a transparent extension of our client’s own engineering staff. We work in all areas of mechanical, software and electrical design, including off-highway mobile equipment and mechanical power transmission, consumer, recreational, industrial, medical products and one-of-a-kind special manufacturing machines. To see a complete listing of our open positions, please go to http://www.rfamec.com/careers/career-opportunities.html

                          Similar Jobs

                          Dover Corporation Logo Dover Corporation

                          Manufacturing Engineer

                          Other • Industrial • Manufacturing • Industrial Equipment
                          In-Office
                          Ball Ground, GA, USA
                          5562 Employees

                          Dover Corporation Logo Dover Corporation

                          Manufacturing Engineer

                          Other • Industrial • Manufacturing • Industrial Equipment
                          In-Office
                          2 Locations
                          5562 Employees
                          In-Office
                          College Park, GA, USA
                          132 Employees
                          In-Office
                          Roswell, GA, USA
                          8 Employees

                          Similar Companies Hiring

                          Fortune Brands Innovations Thumbnail
                          Manufacturing
                          Deerfield, IL
                          10000 Employees
                          Amalgamated Sugar Thumbnail
                          Food • Greentech • Agriculture • Industrial • Manufacturing
                          Boise, Idaho
                          768 Employees
                          Ford Energy Thumbnail
                          Automotive • Software • Energy • Utilities • Manufacturing • Renewable Energy
                          US

                          Sign up now Access later

                          Create Free Account

                          Please log in or sign up to report this job.

                          Create Free Account