The Role
Set up, calibrate, and perform nondestructive testing (MT, VT, UT, PT) and welding inspections on incoming materials and components. Interpret results to applicable standards, document findings, maintain records, perform audits, update SOPs, train Level I technicians, assist in welder qualification, and participate in safety and corrective action initiatives. Travel up to 25%.
Summary Generated by Built In
HOLT CAT in San Antonio, Texas is looking for a expereicned NDT Quality Specialist III who can perform NDT and Welding Inspections, checks, tests, and sampling procedures of incoming materials, parts and components used in the manufacture and fabrication of partially assembled or finished components.
Experienced-level III - position – demonstrates the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results with respect to applicable codes, standards and specifications in accordance with procedures. The Specialist III shall be thoroughly familiar with the scope and limitations of the method for which qualified and should exercise assigned responsibility for on the job training and guidance of NDT Level I personnel. The Specialist III shall be able to organize and report nondestructive test results.
The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development.
Essential Functions
- Sets up and calibrates non-destructive testing equipment
- Conducts tests to ensure quality or detect discontinuities (defects) using NDT methods of Inspection
- Establishes techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations
- Applies testing criteria in accordance with applicable specifications or standards and evaluate results
- Documents, organizes, and reports test results and enforces rework
- Conducts and documents process and system audits using written procedures as audit standards
- Maintains all controlled document files and test records in a timely and accurate manner
- Monitors critical equipment and instrumentation to ensure proper operation and calibration
- Participates in the construction and/or revision of SOPs for the inspection function
- Assists in the writing and updating inspection procedures, protocol, and checklists
- Evaluates problems and makes initial recommendations for possible corrective action
- Participates in client safety initiatives, incident investigations, etc.
- Perform specialized inspections
- Provides instruction and training to others
- Works closely with the client to identify and remove obstacles
- Participates in client safety initiatives, incident investigations, etc.
- Assists in qualifying welding personnel
- Requires regular and punctual employee attendance
- Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards
- Performs other duties as assigned
Knowledge, Skills, and Abilities
- Knowledge of welding and welding inspections
- Knowledge of safety practices as they pertain to welding, cutting, and joining processes
- Knowledge of Non-destructive Testing methods
- Knowledge of specification and drawing interpretations
- Knowledge of dimensional inspection equipment/hand tools, including their designs, uses, repair, and maintenance
- Basic computer skills including MS Office products
- Demonstrated written and oral communication skills
- Ability to perform welding inspections
- Demonstrated ability to effectively perform assigned NDT tasks and interprets results
- Ability to use standard non-destructive testing tools and calibration devices
- Ability to read and comprehend blueprints
- Ability to provide input and suggestions to bring a greater sense of quality to both internal and external customers
- Ability to use relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards
- Ability and desire to continue ongoing training and education in order to maintain certifications and develop new skills and gain knowledge
- Ability to interact and work with individuals and groups
Requirements
Education and Experience:
- Three or more years of experience required; more than five years of work-related experience preferred
- High school diploma or equivalent with specialized/technical training in Welding Technology and Non-Destructive Testing (NDT)
- Strong welding background with 10+ years’ experience holding multiple welding certifications
- Experience working in heavy equipment environment
- NDT Level II in multiple NDT methods
- NDT Magnetic Particle Testing Level I required; Level II preferred
- NDT Visual Testing Level I required; Level II preferred
- NDT Ultrasonic Testing Level I required; Level II preferred
- NDT Penetrant Testing Level I required; Level II preferred
- Multiple Welding Certifications required
- Current and valid CDL License Preferred
Supervisory Responsibilities:
- None
Travel:
- Travel up to 25% of the time with overnight stays of up to three nights per month
Physical Requirements:
- To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities
- Ability to pass eye exam to qualify for certification to SNT-TC-1A or equivalent
- Significant amount of time standing and walking; occasional sitting, kneeling, crouching, stooping, climbing, balancing, and reaching
- Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina
- Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue
- Frequently moves materials or equipment weighing up to 50 lb
- Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work
- This role frequently communicates with others, must be able to exchange accurate information in these situations
Work Environment:
- Frequently works outdoors around moving mechanical parts and exposed to weather extremes that include inclement weather, heat, cold, and humidity
- Requires wearing common protective or safety equipment
- Exposure to hazardous conditions, contaminants, and equipment
- Exposure to small quantities of chemicals, dust, steam, high-pressure water and high speed rotating equipment
- Works in extremely bright or inadequate lighting and exposure to high noise levels
- Works in an enclosed vehicle or equipment
- Required to perform work in cramped spaces and/or awkward positions at times
- Exposure to minor burns, cuts, bites, or stings
Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.
About
HOLT Group is a renowned, family-owned company with a legacy spanning nearly a century. As a powerhouse across several industries, including heavy machinery, construction, consulting services, training, and technology, we prioritize people and values. Our commitment to a Values-Based Leadership® approach has led to trusted partnerships and collaborative endeavors. At the heart of our operations is HOLT CAT, the largest Caterpillar dealership in the nation, along with other companies focused on industrial & commercial selling, energy, technology, and training & development. We excel in selling, servicing, leasing, and renting top-of-the-line industrial machinery and are dedicated to powering the construction and industrial spaces with superior equipment. Moreover, we empower construction and development with advanced technology, along with bringing technical skills and Values-Based Leadership® to individuals and companies seeking sustainable growth. If you're seeking a fulfilling career, explore our job opportunities at HOLT Group and join our values-driven team.
Skills Required
- Three or more years of experience
- High school diploma or equivalent with specialized/technical training in Welding Technology and Non-Destructive Testing (NDT)
- Strong welding background with 10+ years' experience holding multiple welding certifications
- Multiple welding certifications
- Experience working in a heavy equipment environment
- NDT Level II in multiple NDT methods
- Magnetic Particle Testing (MT) Level I
- Magnetic Particle Testing (MT) Level II
- Visual Testing (VT) Level I
- Visual Testing (VT) Level II
- Ultrasonic Testing (UT) Level I
- Ultrasonic Testing (UT) Level II
- Penetrant Testing (PT) Level I
- Penetrant Testing (PT) Level II
- Ability to pass eye exam to qualify for certification to SNT-TC-1A or equivalent
- Basic computer skills including MS Office products
- Ability to read and comprehend blueprints
- Current and valid CDL License
Am I A Good Fit?
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.
Success! Refresh the page to see how your skills align with this role.
The Company
What We Do
HOLT Group is a family-owned, values-driven enterprise headquartered in San Antonio, Texas, with a legacy spanning nearly a century. It operates as a powerhouse across several sectors, including heavy machinery, construction, energy, technology, and training. As the owner of the nation's largest Caterpillar dealership, HOLT CAT, the company excels in selling, servicing, and renting industrial equipment while prioritizing a people-first, Values-Based Leadership® approach to drive sustainable growth for its partners and customers.
