Mechanical Engineer

Posted Yesterday
Be an Early Applicant
Bridgewater, VA, USA
In-Office
62K-81K Annually
Junior
Aerospace
The Role
Performs mechanical and structural design for special-mission aircraft modifications, integrations, and repairs. Creates SolidWorks models and drawings, prepares engineering and work instructions, conducts basic structural calculations and simulations, designs metallic and composite parts, supports aircraft installation and field measurements, applies FAA and OEM requirements, and maintains configuration-controlled engineering data. The role works across office, hangar, and shop-floor environments and requires the ability to obtain a DOD Secret clearance.
Summary Generated by Built In

Live an Adventure, Master your Craft, Find your Purpose
At Dynamic Aviation, we solve unique challenges for our customers with innovative aviation solutions. Our focus is on operations that serve, protect, and enhance the lives of families and communities worldwide. Whether modifying aircraft to help protect our service members overseas, performing geographical mapping for scientific research, or working to suppress large wildfires on the West Coast, we serve with integrity and excellence. 


Position Summary:   Reporting to the Engineering Manager, the Mechanical Engineer I performs mechanical and structural design work of low to moderate complexity on special-mission aircraft modification, integration, and repair projects for the King Air, DHC-8, Boeing 737, and Gulfstream IV. Work is regularly managed: assignments are defined by a Project Engineer or Engineering Manager; drawings and engineering data are checked by a senior engineer before release. This position is the degreed entry tier of the Structural / Mechanical Path of the Dynamic Aviation Engineering Academy Model.

 

Key Responsibilities:

  • Creates 3D models and 2D drawings in SolidWorks for aircraft modification installations, including brackets, equipment racks, antenna and sensor mounts, doublers, fairings, and interior components
  • Prepares engineering orders (EOs), repair instructions (RIs), and work instructions (WIs) for assigned tasks, for checking and release by a senior engineer
  • Performs basic engineering calculations, including fastener, edge distance, bearing, and load path checks and weight and balance inputs, under the direction of a senior engineer
  • Supports structural analysis on assigned components, including SolidWorks Simulation runs set up and reviewed with a senior engineer or the Engineering Manager before results are used
  • Designs metallic and composite parts, including formed and machined details, with attention to manufacturability, using input from the fabrication and machine shops
  • Takes field measurements and surveys on aircraft to support design, and verify fit and installation on the shop floor
  • Supports mechanics and inspectors during installation by answering technical questions and documenting discrepancies and engineering changes through the established process
  • Applies 14 CFR requirements, FAA Advisory Circular (AC) 43.13-1B methods, and OEM structural repair manuals to assigned designs
  • Maintains models, drawings, and part data in Product Data Management (PDM) in accordance with configuration management procedures
  • Other duties as assigned

 

Required Qualifications:

  • BS in Mechanical, Aerospace, or Aeronautical Engineering or a related technical field, with 0-2 years’ engineering experience (internships and co-ops count), or an AS degree in a related technical field with a minimum of 4 years’ applicable experience and a demonstrated level of competency
  • Experience creating 3D models and drawings in SolidWorks or comparable CAD software
  • Working knowledge of statics, strength of materials, and engineering drawing standards
  • Ability to read and interpret engineering drawings, aircraft maintenance manuals, and structural repair manuals
  • Clear written and verbal communication with mechanics, inspectors, and other engineers
  • Detail oriented with strong organizational skills
  • Experienced user of Microsoft Office products, notably Excel

Preferred Qualifications:

  • Internship or cooperative education experience in aerospace, aircraft maintenance, or manufacturing
  • Certified SolidWorks Associate (CSWA) or Certified SolidWorks Professional (CSWP)
  • Familiarity with coordinate dimensions systems and geometric dimensioning and tolerancing (GD&T) per ASME Y14.5
  • Familiarity with 14 CFR Parts 23, 25, and 43 and AC 43.13-1B
  • Hands-on experience in aircraft maintenance or in the fabrication and installation of metallic and composite structures
  • Knowledge and familiarity with commercial Large Language Model (LLM) tools
  • Experience presenting designs to small groups, such as design reviews with engineers, mechanics, or customers

 

Additional Requirements:

  • Ability to travel as required, up to 10%
  • Proper work authorization documentation to work in the US
  • Ability to obtain and maintain a DOD Secret Security Clearance
  • Ability to work on and around aircraft in hangar and flight line environments using required personal protective equipment (PPE)
  • Ability to lift and move items up to approximately 25 pounds
  • Ability to view computer screens and drawings for extended periods, with close vision and the ability to adjust focus

 

Working Conditions:

  • Supports core business hours of 0900–1500 ET with a 5/40 work week; with occasional extended hours to support aircraft schedules
  • Divides time between office, hangar, and shop floor environments
  • Prolonged periods at a desk working on a computer, including CAD modeling and review of drawings and technical data
  • Regular standing and walking in the hangar, with climbing of ladders and workstands, bending, kneeling, and access to confined areas of aircraft
  • Exposure to hangar noise, varying temperatures, and fumes typical of aircraft maintenance environments; hearing and eye protection required where posted

 

Pay Band: $61,800 - $80,600. Starting pay is determined by experience, qualifications, and internal equity, and typically falls between the minimum and midpoint of the pay range.

 

 

It is the policy of Dynamic Aviation to prohibit and eliminate discrimination on grounds of race, color, religion, sex, (including pregnancy, childbirth or related medical conditions), sexual orientation, gender identity, national origin, ancestry, age, disability, veteran status, marital status, or any other characteristics protected by law. It is also Dynamic Aviation's policy to provide equal employment for all and comply with any affirmative action obligations pursuant to the Federal Executive Orders, 11246 and 11375, as amended. 
 

 

Skills Required

  • BS in Mechanical, Aerospace, Aeronautical Engineering, or related technical field, plus 0–2 years of engineering experience; internships and co-ops count
  • Alternatively, an AS degree in a related technical field with at least 4 years of applicable experience and demonstrated competency
  • Experience creating 3D models and drawings in SolidWorks or comparable CAD software
  • Working knowledge of statics, strength of materials, and engineering drawing standards
  • Ability to read and interpret engineering drawings, aircraft maintenance manuals, and structural repair manuals
  • Clear written and verbal communication skills
  • Strong attention to detail and organizational skills
  • Experience using Microsoft Office products, especially Excel
  • Internship or cooperative education experience in aerospace, aircraft maintenance, or manufacturing
  • Certified SolidWorks Associate or Certified SolidWorks Professional certification
  • Familiarity with coordinate dimensioning systems and GD&T per ASME Y14.5
  • Familiarity with 14 CFR Parts 23, 25, and 43 and FAA AC 43.13-1B
  • Hands-on experience with aircraft maintenance or fabrication and installation of metallic and composite structures
  • Knowledge of commercial Large Language Model tools
  • Experience presenting designs to small groups
  • Ability to travel as required, up to 10%
  • Proper work authorization documentation to work in the United States
  • Ability to obtain and maintain a DOD Secret Security Clearance
  • Ability to work around aircraft in hangar and flight-line environments using required PPE
  • Ability to lift and move items up to approximately 25 pounds
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Bridgewater, VA
407 Employees
Year Founded: 1967

What We Do

Dynamic Aviation is the leading provider of modified aircraft, leased and operated worldwide in niche markets, with more than 140 aircraft and over 50 years of an aviation legacy of excellence. We combine our creative ingenuity with dependable aircraft and a state-of-the-art infrastructure to develop and deliver extremely flexible solutions that help our customers achieve new levels of performance and productivity. Dynamic Aviation provides the precise aerial assets you need—including mission-modified aircraft, experienced flight crews, and reliable maintenance services—to accomplish a variety of special missions, including: Our customers include national defense, military intelligence, and other federal agencies; state and local governments; nonprofit research organizations; and private companies. With aircraft operating from twenty locations in eight countries on four continents, we have the resources to deliver world-class aviation solutions where and when our customers need them.

Similar Jobs

DigitalOcean Logo DigitalOcean

Infrastructure Engineer

Artificial Intelligence • Cloud • Software • Infrastructure as a Service (IaaS)
In-Office
Richmond, VA, USA
1400 Employees
130K-160K Annually

Shield  Logo Shield

Staff Engineer

Aerospace • Artificial Intelligence • Machine Learning • Robotics • Software • Defense Technology
In-Office
2 Locations
143K-214K Annually

Decision Technologies, Inc. Logo Decision Technologies, Inc.

Mechanical Engineer G/ATOR

Aerospace • Professional Services • Defense
In-Office
Virginia Beach, VA, USA
109 Employees
99K-114K Annually

Industry Trade Advisory Committee 1 (ITAC 1) Logo Industry Trade Advisory Committee 1 (ITAC 1)

Senior Mechanical Engineer

Aerospace • Professional Services • Consulting • Defense
In-Office
Norfolk, VA, USA
600 Employees
115K-165K Annually

Similar Companies Hiring

Rangeview Thumbnail
Aerospace • Robotics • Energy • Defense • Manufacturing • Weapons Systems
El Segundo, California
38 Employees
Outpost Space Thumbnail
Aerospace • Defense
Los Angeles, California
38 Employees
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account