The Role
Owns manufacturing processes for wiring and electrical assembly of switchboards and switchgear. Develops work instructions, routings, tooling, fixtures, process controls, and documentation; supports production troubleshooting; leads Lean, Six Sigma, and Kaizen improvements; provides electrical design-for-manufacturability feedback; verifies build-to-print conformance; analyzes manufacturing KPIs; and ensures compliance with applicable UL, NFPA, NEC, and ANSI/IEEE standards.
Summary Generated by Built In
Butcher Power Products (BPP) designs and manufactures mission‑critical and industrial power solutions for essential infrastructure nationwide. Headquartered in Sacramento, CA, our teams collaborate closely across engineering, manufacturing, and operations to build reliable, high‑quality systems and take pride in delivering work that truly matters.
Job Summary:
The Manufacturing Electrical Engineer owns the manufacturing process by which Butcher Power Products’ switchboard and switchgear products are wired and electrically assembled. Working from the wiring design group’s released diagrams and panel layouts, the role develops, documents, and continuously improves the processes, tooling, and work instructions that build those products safely, repeatably, and at cost.
It owns the process, not the drawings: design and wiring diagrams stay with Product and Electrical Engineering, and the Assembly team performs the build. The Manufacturing Electrical Engineer is accountable that what ships is built to print, and drives manufacturability and as-built feedback back upstream.
Key Responsibilities:
Process Development: Design, implement, and optimize the manufacturing processes, routings, and work instructions that build BPP’s products — translating the wiring design group’s released diagrams into buildable wiring and electrical-assembly processes.
Production Support: Provide hands-on support to the Assembly floor and serve as the engineering escalation point for the wiremen on wiring and troubleshooting issues, driving corrective actions that keep the line producing.
Tooling & Fixtures: Specify, design, and implement tooling and fixtures — including wiring stations, wire-marking, and harness/formboards — and keep them set up, maintained, and calibrated.
Continuous Improvement: Lead Lean, Six Sigma, and Kaizen initiatives to reduce defects, rework, and cycle time and improve throughput and yield on electrical assembly.
Design for Manufacturability: Partner with Product and Electrical Engineering and the wiring design group at design review to provide electrical DFM feedback before release, and develop the production process for newly released designs (NPI).
Build-to-Print & Design Conformance: Own design conformance for electrical assembly — verify as-built panels and wiring match the released documentation through first-article and in-process checks, and route as-built redlines upstream via ECO (with Quality owning the inspection record).
Process Documentation: Develop and maintain routings, SOPs, work instructions, and process records.
Process Controls & Capability: Own the manufacturing side of wiring PFMEAs and control plans, and support Quality Engineering’s root-cause and corrective/preventive actions.
Data Analysis: Track and act on manufacturing KPIs such as wiring cycle time, scrap/rework, and first-pass yield.
Safety & Compliance: Ensure processes comply with UL 891 (and UL 1008S / UL 1558 as applicable), UL 508A and NFPA 79 wiring practices, the NEC, and ANSI/IEEE, and support UL inspections. Must comply with the company’s safety policies.
Qualifications
Required:
- Bachelor’s degree in Electrical, Electromechanical, or Manufacturing Engineering — or equivalent hands-on experience.
- 3+ years of manufacturing or process engineering in electrical assembly, panel wiring, or switchgear/switchboard production.
- Strong knowledge of manufacturing methods, process improvement, and production flow.
- Able to read, interpret, and redline schematics, wiring diagrams, panel layouts, and point-to-point/wire lists.
- Working knowledge of NEC, NFPA 79, and UL 508A wiring practices, and familiarity with UL 891 construction.
- Experience authoring work instructions, routings, and process documentation, with hands-on knowledge of wire termination methods and torque.
- Strong analytical, problem-solving, and communication skills.
Preferred:
- Experience in UL-listed switchgear, switchboard, or UL 508A control-panel manufacturing.
- Lean / Six Sigma certification (Green or Black Belt).
- ERP/MRP experience, particularly Microsoft Dynamics 365 (D365).
- ECAD familiarity — AutoCAD Electrical, SolidWorks Electrical, or EPLAN.
Core Competencies:
- Manufacturing Process Engineering
- Electrical Assembly & Technical Expertise
- Continuous Improvement & Lean Manufacturing
- Production Support & Collaboration
- Quality & Process Control
- Regulatory & Industry Compliance
- Tooling, Fixtures & Manufacturing Systems
- Data Analysis & Performance Management
- Problem Solving & Analytical Thinking
- Leadership & Ownership
Physical Requirements:
- Ability to safely lift, carry, push, and pull materials, tools, and equipment weighing up to 25 pounds regularly and up to 50 pounds occasionally, with or without reasonable accommodation.
- Ability to remain in a stationary position and/or move throughout the manufacturing environment for extended periods as required to support production operations.
- Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.
The base pay range for this role is $105,000 – $130,000 per year.
Equal Opportunity Employer
Butcher Power Products is an equal opportunity employer and considers all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic.
If you require a reasonable accommodation during the application or interview process, please let us know.
Compensation ranges are provided in accordance with applicable state and local pay transparency laws.
Skills Required
- Bachelor's degree in Electrical, Electromechanical, or Manufacturing Engineering, or equivalent hands-on experience
- 3+ years of manufacturing or process engineering experience in electrical assembly, panel wiring, or switchgear/switchboard production
- Strong knowledge of manufacturing methods, process improvement, and production flow
- Ability to read, interpret, and redline schematics, wiring diagrams, panel layouts, and point-to-point/wire lists
- Working knowledge of NEC, NFPA 79, and UL 508A wiring practices, with familiarity with UL 891 construction
- Experience authoring work instructions, routings, and process documentation
- Hands-on knowledge of wire termination methods and torque
- Strong analytical, problem-solving, and communication skills
- Experience in UL-listed switchgear, switchboard, or UL 508A control-panel manufacturing
- Lean or Six Sigma certification, Green Belt or Black Belt
- ERP/MRP experience, particularly Microsoft Dynamics 365
- ECAD familiarity with AutoCAD Electrical, SolidWorks Electrical, or EPLAN
Am I A Good Fit?
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.
Success! Refresh the page to see how your skills align with this role.
The Company
What We Do
Butcher Power Products (BPP) designs and manufactures mission-critical low-voltage electrical distribution equipment — UL891 switchboards, UL67 panelboards, integrated power centers and solar-ready switchboards. Based in the Sacramento/Rancho Cordova area, BPP focuses on fast lead times, custom engineering and in-house manufacturing to supply data centers, hospitals and industrial customers with reliable power distribution solutions.
