Job Description
Trystar’s team members are our most important asset. We are looking for a Lead Test Engineer, Power Conversion, to own the design verification and validation of our power conversion products, from the first prototype through certification and release to commercial-scale manufacturing. Our products include rectifiers, inverters, DC/DC converters, and integrated power conversion systems for data centers, energy storage, and other critical power applications, at power levels from tens to hundreds of kilowatts and voltages up to 1500 VDC. You will develop the test methods, plans, and benches that prove each design meets its requirements, run the tests in our power laboratory, validate the integration of embedded controls, firmware, and communications with the power hardware, and lead compliance, temperature-rise, and environmental testing at Trystar and at external laboratories, including certification laboratories and Nationally Recognized Testing Laboratories (NRTLs). You will work as a senior individual contributor, set up the verification and validation practices that design teams follow, and direct the test technicians and engineers who run tests with you.
Location: Merrimack, NH, onsite. Travel within North America up to 25%.
What you will do:
- Own design verification by test and demonstration, and design validation, for assigned power conversion products, from the first prototype through certification and release to commercial-scale manufacturing.
- Develop test methods, test plans, procedures, and acceptance criteria that trace to product requirements, and agree on the verification method for each requirement with systems and design engineers.
- Design, build, and commission test benches and fixtures for rectifiers, inverters, and DC/DC converters, including power sources and loads, instrumentation, interlocks, and protection.
- Set up and operate power laboratory equipment, including grid simulators, regenerative DC sources and loads, battery simulators, power analyzers, oscilloscopes, high-voltage and current probes, thermal data acquisition, and liquid cooling systems.
- Automate test sequences, equipment control, and data acquisition in LabVIEW and maintain the test software, data logging, and test records.
- Run functionality, performance, efficiency, protection, fault-injection and fault response, transient and load-step, parallel operation, and endurance tests and analyze the results.
- Validate interactions between power hardware, embedded controls, firmware, communications, and supervisory control systems, including startup and shutdown sequencing, state transitions, fault handling, communications loss, and recovery behavior.
- Plan and run temperature-rise tests and correlate measured temperatures with thermal models and component ratings.
- Plan and run environmental tests, such as cold, dry heat, damp heat, temperature cycling, vibration, and shock, at Trystar or at external laboratories.
- Prepare products and samples for compliance testing, run pre-compliance tests, and conduct and witness safety, grid interconnection, and EMC tests at certification laboratories and NRTLs.
- Record objective evidence for each verified requirement, write test reports, and present test status, anomalies, and residual risks at design reviews and verification readiness reviews.
- Investigate test failures, lead root-cause analysis with design engineers, and verify corrective actions by retest.
- Derive end-of-line test requirements for commercial-scale manufacturing from design verification results and hand them to manufacturing test engineering.
- Direct test technicians and engineers in test execution, enforce safe work practices for high-voltage and high-energy testing, and keep test equipment calibrated and ready for use.
- Evaluate test equipment and methods and recommend laboratory capability investments as product voltage and power ratings grow.
- Develop and maintain the product validation schedule, identify test dependencies and critical-path activities, and communicate test readiness, blockers, risks, and completion status to engineering and program leadership.
REQUIRED
- Bachelor’s degree in electrical engineering or a related technical field, with typically 7 or more years of relevant industrial experience in hands-on testing and validation of power electronic converters.
- Experience with hands-on bench testing of rectifiers, inverters, DC/DC converters, UPS, or similar equipment at power levels from tens to hundreds of kilowatts.
- Experience writing test methods, test plans, procedures, and test reports traced to product requirements.
- Experience preparing for and conducting compliance testing at certification laboratories or NRTLs, including temperature-rise testing.
- Experience validating interactions between power hardware, embedded controls, firmware, communications, and supervisory control systems, including sequencing, fault handling, and communications-loss recovery.
- Experience planning and running environmental tests to IEC 60068-2, MIL-STD-810, or equivalent standards.
- Experience automating tests and data acquisition in LabVIEW.
- Proficiency with power analyzers, oscilloscopes, high-voltage and current probes, thermocouple data acquisition, grid simulators, regenerative DC sources and loads, and battery simulators.
- Proficiency with Python for test automation and data analysis, and with Jira for test planning and tracking.
- Working knowledge of NFPA 70E and safe work practices for high-voltage and high-energy testing.
- Experience planning and tracking test schedules, identifying dependencies, and communicating test readiness and risks to engineering and program leadership.
- Demonstrated experience leading test programs, influencing design teams, and directing technicians and engineers.
PREFERRED
- Master’s degree in electrical engineering.
- NI Certified LabVIEW Developer (CLD) or Certified LabVIEW Architect (CLA).
- Experience with NI TestStand for test automation.
- Experience with hardware-in-the-loop testing, such as OPAL-RT, and with PSCAD or MATLAB/Simulink.
- Experience with product and test standards such as UL 62477-1, UL 1741 and IEEE 1547, IEC 62040-3, UL 9540, the IEC 61000 series, and IEC 60529 or UL 50E.
- Experience testing DC power, data center, or battery energy storage products.
- Experience testing liquid-cooled power equipment.
- Experience with HALT, HASS, or accelerated life testing.
- Experience with SCADA, test data logging, and test data management systems.
- Experience with industrial communications protocols, such as Modbus or CAN, in testing power conversion controls.
- NFPA Certified Electrical Safety Compliance Professional (CESCP).
Skills
- Analytical rigor and attention to detail in measurement, data analysis, and test documentation.
- Sound engineering judgment in balancing test coverage, risk, schedule, and safety, and independence and integrity in reporting results that constrain a design.
- Clear written and verbal communication of test results, anomalies, and limitations to technical and non-technical audiences.
- Collaborative technical leadership across power electronics, controls, firmware, mechanical, systems, compliance, and manufacturing engineering.
- Disciplined planning, prioritization, and delivery of test campaigns against a development schedule.
Working Conditions
You will work in our power laboratory, in manufacturing areas, and at external test laboratories, including energized, high-voltage, and high-energy test areas, wearing the personal protective equipment that NFPA 70E and site rules require. The role requires standing, walking, climbing, kneeling, and reaching for extended periods, and lifting test equipment of up to 50 pounds, using mechanical aids where required. Travel within North America is up to 25%, including overnight stays at certification laboratories, NRTLs, and other external test laboratories. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
Skills Required
- Bachelor's degree in electrical engineering or a related technical field, with typically 7 or more years of relevant industrial experience in hands-on testing and validation of power electronic converters.
- Hands-on bench testing experience with rectifiers, inverters, DC/DC converters, UPS, or similar equipment at tens to hundreds of kilowatts.
- Experience writing test methods, test plans, procedures, and test reports traced to product requirements.
- Experience preparing for and conducting compliance testing at certification laboratories or NRTLs, including temperature-rise testing.
- Experience validating interactions among power hardware, embedded controls, firmware, communications, and supervisory control systems.
- Experience planning and running environmental tests to IEC 60068-2, MIL-STD-810, or equivalent standards.
- Experience automating tests and data acquisition in LabVIEW.
- Proficiency with power analyzers, oscilloscopes, high-voltage and current probes, thermocouple data acquisition, grid simulators, regenerative DC sources and loads, and battery simulators.
- Proficiency with Python for test automation and data analysis, and Jira for test planning and tracking.
- Working knowledge of NFPA 70E and safe work practices for high-voltage and high-energy testing.
- Experience planning and tracking test schedules, identifying dependencies, and communicating test readiness and risks to engineering and program leadership.
- Demonstrated experience leading test programs, influencing design teams, and directing technicians and engineers.
- Master's degree in electrical engineering.
- NI Certified LabVIEW Developer or Certified LabVIEW Architect certification.
- Experience with NI TestStand for test automation.
- Experience with hardware-in-the-loop testing, OPAL-RT, PSCAD, or MATLAB/Simulink.
- Experience with product and test standards including UL 62477-1, UL 1741, IEEE 1547, IEC 62040-3, UL 9540, IEC 61000 series, IEC 60529, or UL 50E.
- Experience testing DC power, data center, or battery energy storage products.
- Experience testing liquid-cooled power equipment.
- Experience with HALT, HASS, or accelerated life testing.
- Experience with SCADA, test data logging, and test data management systems.
- Experience with industrial communications protocols such as Modbus or CAN in testing power conversion controls.
- NFPA Certified Electrical Safety Compliance Professional certification.
What We Do
Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. Safety and integrity aren’t just buzzwords. They are the north star guiding us as we aspire to wow our customers every day. We’ve created power solutions that are not only durable and unique but are also the result of serious teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. As a big name and pioneer in power solutions, we’re not just part of the power conversation – we’re shaping its future, and we’re doing so across diverse industry sectors including utilities, data centers, healthcare, entertainment, education, government, and commercial construction – just to name a few! We’re committed to growing and evolving our product lineup to stay on top of the game and that includes leaning into sustainable, resilient, and renewable energy solutions. Our cutting-edge headquarters in Faribault, MN is partially solar- and wind-powered by our own microgrid! You’ll find that we’re also pushing boundaries across the country at our additional facilities in Troy, MI; Houston, TX; Merrimack, NH; Burnsville, MN; and Murfreesboro, TN. Together, we are Trystar, where we power the future and nurture innovation for a brighter tomorrow.






