Integration Engineer Swarm Systems

Posted 11 Hours Ago
Be an Early Applicant
92121, San Diego, CA, USA
In-Office
90K-141K Annually
Mid level
Aerospace • Information Technology • Robotics • Defense
The Role
Build, configure, integrate, test, fly, and troubleshoot small unmanned aircraft and swarm systems. Responsibilities include installing hardware, tuning autopilots, integrating radios and payloads, analyzing flight logs, testing software releases, documenting configurations, diagnosing failures, and supporting field deployments. The role is fully on-site in San Diego, requires independent work around flight-test schedules, and includes travel for test events and operational support.
Summary Generated by Built In

Apium Swarm Robotics (ASR) is revolutionizing swarm autonomy software for air, surface, undersea, and ground vehicles operating across dual-use commercial and defense environments. Our systems are deployed on real platforms, tested in the field, and delivered to customers operating in complex, uncertain, and safety-critical conditions.

 

We do not build research prototypes or slideware. Our software is integrated into real vehicles, tested in the field, and delivered to customers who depend on operational reliability, speed of execution, and mission relevance. We prioritize performance over hype.

 

ASR systems represent the next phase in autonomy: collaborative swarming. These are not like pre-programmed drones for light shows. We are creating real-time cooperative management that lets one operator control dozens to hundreds of vehicles in real-time with the ease of controlling a single vehicle. As such, this role requires comfort with responsibility, ambiguity, and operational accountability.

 

Integration Engineering owns the build-test-fly loop. This role sits between our software engineers and our Mission Engineers: you take new airframes, hardware, firmware, and swarm software releases, integrate them on real aircraft, and prove them on the bench and in the air before they go to the field.

 

This is a hands-on, on-site role at our San Diego facility. You will spend your days building, configuring, testing, flying, breaking, and fixing small unmanned aircraft. It is not primarily customer-facing. You will travel when a test event, integration sprint, or field problem needs the person who built the system.

 

You will work with a high degree of autonomy, own your builds end to end, and give direct, evidence-based feedback to engineering on what works, what fails, and why.

 

 

Essential Duties and Responsibilities
  • Build, modify, and maintain small UAS from FPV quads to ASR swarm airframes: soldering, wiring harnesses, power distribution, and motor, ESC, and flight controller installation
  • Flash, configure, and tune flight controllers across multiple autopilot stacks (e.g., ArduPilot, PX4), including firmware, parameters, PID and filter tuning, failsafes, and flight modes
  • Integrate radios, datalinks, GNSS/compass, companion computers, and payloads into airframes and into ASR’s swarm software
  • Bench-test hardware and software before it flies: power, RF link, sensor, and configuration checks, plus simulation (SITL/HITL) where applicable
  • Plan and fly test flights, from single-aircraft checkouts to multi-aircraft swarm tests
  • Pull and analyze onboard flight logs (e.g., ArduPilot DataFlash, PX4 ULog) to diagnose vibration, tuning, power, and link issues
  • Troubleshoot failures to root cause across hardware, firmware, configuration, and RF, and document the fix
  • Test new software releases and report bugs to engineering with reproducible steps and supporting logs
  • Write and maintain build sheets, configuration baselines, and test reports so every build is repeatable and supportable in the field
  • Prepare, check, and pack aircraft kits for deployments, and maintain shop inventory, spares, and test equipment
  • Travel as needed to support test events, field deployments, and Mission Engineers
Required Qualifications
  • U.S. citizenship (this position requires access to export-controlled technical data)
  • 3+ years of hands-on experience building, programming, and flying FPV or small multirotor aircraft (personal, professional, or military); building means from parts, including soldering, flashing, tuning, and repairing after a crash
  • Part 107 Remote Pilot Certificate
  • Proficiency configuring and tuning flight controllers on at least one firmware stack (e.g., Betaflight, INAV, ArduPilot, PX4)
  • Strong soldering and electrical skills: harnesses, connectors, power distribution, reading pinouts and wiring diagrams, and multimeter use
  • Working knowledge of RC control links, FPV video systems (analog and digital), and safe LiPo/Li-ion battery handling
  • Systematic troubleshooting, able to isolate hardware, firmware, RF, and configuration faults
  • Must live in the San Diego area or be willing to relocate (relocation assistance available)
  • Willingness and ability to travel when needed, sometimes on short notice
  • Comfort working independently with limited oversight
  • Ability to remain calm and effective under operational pressure
Additional Desired Qualifications
  • ArduPilot and/or PX4 experience (strongly preferred), including parameter tuning and log analysis
  • Mission Planner and/or QGroundControl
  • MAVLink integration, tooling, or scripting
  • Lua scripting on ArduPilot
  • Experience modifying firmware or building custom firmware targets
  • Companion computers (e.g., Raspberry Pi, NVIDIA Jetson), Linux command line, and Python scripting
  • Experience integrating mesh or IP-based datalinks
  • CAD and 3D printing for mounts, brackets, and enclosures
  • Multi-vehicle or swarm flight experience
  • Military experience building, maintaining, or operating unmanned systems, including unit-level FPV programs
  • Experience working in defense, export-controlled, or government-adjacent environments
  • U.S. security clearance or ability to obtain one
Physical Requirements and Working Conditions
  • Work on-site full time at our San Diego facility; this is not a remote or hybrid role.
  • Ability to travel when required, including occasional international travel.
  • Ability to work irregular hours around flight-test windows and deployments.
  • Ability to work safely around LiPo and Li-ion batteries, soldering equipment, 3D printers, and spinning propellers, and to lift and transport field equipment as required.

Background Check

This position will require successfully completing a post-offer background check. Qualified candidates with a criminal history will be considered and are not automatically disqualified, consistent with federal and state law.

EEO and ITAR/EAR Work Authorization Disclosure

Red Cat Holdings is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability, genetics information, protected veteran status, sexual orientation, gender identity or expression, citizenship or immigration status, or any other characteristic protected by federal, state or local laws.

Certain positions may require access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”). Such access may be provided without export authorizations to individuals who meet the applicable definition of a “U.S. person.” This generally includes U.S. citizens and nationals, lawful permanent residents, refugees, and asylees. 

Applicants who do not meet the definition of a U.S. person may be considered for employment where Red Cat Holdings can obtain any required export authorization or implement an appropriate access-control arrangement.  Employment decisions will be made in accordance with applicable export-control requirements and anti-discrimination laws.  Applicants must be legally authorized to work in the United States. Any requirement concerning immigration sponsorship will be stated separately and will not be used as a substitute for an individualized export-control assessment. 

E-Verify

The company participates E-Verify ensure eligibility for employment and compliance with Right to Work rules.

Compensation: $90,390 - $141,335, plus eligibility for performance-based bonuses, highly competitive equity grants, and full benefits. 

Skills Required

  • U.S. citizenship or qualifying U.S. person status for access to export-controlled technical data
  • At least 3 years of hands-on experience building, programming, repairing, and flying FPV or small multirotor aircraft
  • Part 107 Remote Pilot Certificate
  • Experience configuring and tuning flight controllers using Betaflight, INAV, ArduPilot, PX4, or similar
  • Strong soldering and electrical skills, including wiring harnesses, connectors, power distribution, pinouts, wiring diagrams, and multimeter use
  • Working knowledge of RC control links, FPV video systems, and safe LiPo or Li-ion battery handling
  • Systematic troubleshooting across hardware, firmware, RF, and configuration faults
  • Live in the San Diego area or be willing to relocate
  • Willingness and ability to travel, sometimes on short notice
  • Ability to work independently with limited oversight
  • Ability to remain calm and effective under operational pressure
  • ArduPilot or PX4 experience, including parameter tuning and log analysis
  • Mission Planner or QGroundControl experience
  • MAVLink integration, tooling, or scripting experience
  • Lua scripting on ArduPilot
  • Experience modifying firmware or building custom firmware targets
  • Experience with companion computers, Linux command line, and Python scripting
  • Experience integrating mesh or IP-based datalinks
  • CAD and 3D printing experience for mounts, brackets, and enclosures
  • Multi-vehicle or swarm flight experience
  • Military experience with unmanned systems
  • Experience in defense, export-controlled, or government-adjacent environments
  • U.S. security clearance or ability to obtain one
  • Ability to work on-site full time in San Diego and around irregular flight-test or deployment hours
  • Ability to safely handle batteries, soldering equipment, 3D printers, spinning propellers, and field equipment
  • Successful completion of a post-offer background check
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: San Juan, PR
244 Employees
Year Founded: 1984

What We Do

Red Cat Holdings, Inc. provides advanced all-domain drone and robotic solutions for defense, national security, and commercial applications.

Similar Jobs

Apium Swarm Robotics, Inc. Logo Apium Swarm Robotics, Inc.

Integration Engineer

Aerospace • Robotics • Software • Defense
In-Office
92121, San Diego, CA, USA
90K-141K Annually

Liberty Mutual Insurance Logo Liberty Mutual Insurance

Associate Attorney

Artificial Intelligence • Fintech • Insurance • Marketing Tech • Software • Analytics
Hybrid
6 Locations
40000 Employees
100K-171K Annually

General Motors Logo General Motors

Product Manager

Automotive • Big Data • Information Technology • Robotics • Software • Transportation • Manufacturing
Hybrid
2 Locations
165000 Employees
135K-245K Annually

General Motors Logo General Motors

Software Engineer

Automotive • Big Data • Information Technology • Robotics • Software • Transportation • Manufacturing
Hybrid
3 Locations
165000 Employees

Similar Companies Hiring

Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees
Unusual Machines, Inc. Thumbnail
Hardware • Robotics
Orlando, FL
300 Employees
RapidScale Thumbnail
Cloud • Information Technology • Consulting
Raleigh, NC
600 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account