FPGA Engineer

Reposted 11 Days Ago
Be an Early Applicant
San Carlos, CA, USA
In-Office
150K-200K Annually
Senior level
Aerospace • Artificial Intelligence • Energy • Defense
The Role
Design, implement, and verify FPGA/RTL for compute payloads: sensor interfaces, deterministic pixel capture, high-throughput DDR/DMA datapaths, and AXI register interfaces to embedded Linux. Drive synthesis, timing closure across Zynq/Versal/Cyclone targets, testbench-based verification and lab bring-up. Support Petalinux, driver integration, platform firmware/BMC bring-up, board integration, anomaly investigation, and CI/regression for FPGA workflows.
Summary Generated by Built In

Cowboy Space Corp. is building the infrastructure to power and connect the orbital economy. Our satellites operate in Low Earth Orbit to collect sunlight and enable a new class of capabilities—from powering on-orbit compute, to transmitting energy via infrared lasers (space-to-earth and space-to-space), powering on-orbit compute to delivering secure, high-bandwidth optical data. By rethinking how energy and data are generated and distributed in space, we’re unlocking entirely new ways to operate both in orbit and on Earth.

Founded in 2024 by Baiju Bhatt (co-founder of Robinhood), Cowboy Space Corp. is backed by leading investors and built by a team from top aerospace and defense organizations. We’re moving quickly to solve complex technical challenges and build a new category of space infrastructure.

About the Role

FPGA/RTL Engineer

We're looking for an experienced FPGA/RTL engineer to help build our state-of-the-art optical communication system — the hard-real-time logic that connects optical communication terminals to embedded computers. You'll work closely with our

optical communication team to design and own HDL for optical-link interfaces and high-speed data pipelines for in-orbit and ground communications. This is active development on a live flight program with near-term launch milestones: you'll join a small team, take full ownership of workstreams from day one, and see your designs fly.

Responsibilities

  • Design, implement, and verify HDL/RTL in SystemVerilog/Verilog for the FPGA subsystems of our state-of-the-art optical communication system, from architecture through on-orbit operation

  • Partner directly with the optical communication team to design and implement FPGA logic for free-space optical communication links, including modem interfacing, framing/synchronization, and high-throughput data pipelines

  • Develop high-throughput communication pipelines for moving compute and optical-link data from orbit to the ground, including high-speed Ethernet (10/25/40/100GbE) MAC/PCS logic, SERDES/transceiver configuration, and link-layer framing within the FPGA fabric

  • Build memory-mapped register interfaces (AXI) between FPGA logic and onboard flight software, and define the hardware/software contract with flight software engineers

  • Own timing closure, synthesis, and implementation across Zynq UltraScale+ and Versal targets using Vivado and related toolchains

  • Develop testbenches and simulation environments to verify designs before hardware, and validate on the bench with logic analyzers, oscilloscopes, and protocol analyzers

  • Lead board bring-up and hardware integration for new payload avionics, working closely with electrical and embedded software engineers

  • Investigate anomalies spanning the optical-link-to-ground and software chain, perform root cause analysis, and drive fixes across hardware/firmware/software boundaries

  • Document designs and interfaces, and pair with teammates to spread ownership of the FPGA function across the team

Basic Qualifications

  • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field

  • 5+ years of experience in FPGA/HDL design, including architecture, verification, synthesis, and timing closure

  • Proficiency in SystemVerilog or Verilog for production FPGA development

  • Hands-on experience with Xilinx/AMD FPGA platforms (e.g., Zynq, Zynq UltraScale+) and toolchains (Vivado, Vitis)

  • Experience designing high-speed digital interfaces and DDR/DMA-based datapaths

  • Experience integrating FPGA logic with embedded software, including memory-mapped register interfaces and driver-level debugging

  • Experience developing FPGA platforms for multi-gigabit data pipelines, including integrating forward error correction and other stabilization techniques — optical communication or high-speed Ethernet experience strongly preferred

  • Hands-on hardware bring-up and lab debugging experience with oscilloscopes, logic analyzers, and embedded debug tools

  • Demonstrated ability to own open-ended design problems independently and carry them from architecture through hardware and on-orbit operation

Preferred Qualifications

  • Master's degree in Electrical Engineering, Computer Engineering, or a related discipline

  • Experience in aerospace, defense, semiconductor, or other high-reliability development

  • Experience with free-space or fiber optical communication systems — optical communication terminals, coherent/direct-detection modems, or high-speed optical transceivers

  • Experience implementing Ethernet or other high-speed serial protocol layers (MAC/PCS/PMA) directly in FPGA fabric — a big plus

  • Understanding of network topology and architecture (routing, switching, protocol stacks) — a bonus

  • Familiarity with Versal ACAP architecture and Quartus toolflows

  • Experience with simulation and verification tools such as Questa/ModelSim, Xcelium, or Verilator, and with UVM or other structured verification methodologies

  • Proficiency with C/C++, Python, and TCL for bring-up, test automation, and tooling

  • Experience with hardware-in-the-loop testing and automated regression of FPGA designs

  • Familiarity with fault-tolerant design and radiation effects mitigation (SEU scrubbing, TMR, configuration memory integrity) for space applications

  • Experience thriving in fast-paced, high-ownership environments with rapid iteration cycles

Compensation and Benefits

The salary range for this position is $150,000 – $200,000 annually. The actual base salary offered will depend on factors such as job-related skills, experience, qualifications, and internal equity.

  • Equity in Cowboy Space Corp.

  • Employees and their eligible dependents may enroll in medical, dental, and vision insurance

  • 401(k) retirement savings plan

  • Paid time off

  • 10 paid holidays per calendar year

  • Paid parental leave

  • Relocation assistance if applicable

  • Daily lunch in the office and a fully stocked kitchen with beverages and snacks

ITAR Requirements

  • Export Control Requirement: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicants must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.

Disclaimer

This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at Cowboy Space Corp.’s discretion.

Cowboy Space Corp. is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. Cowboy Space Corp. is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions relating to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws.

Skills Required

  • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field
  • 5+ years of experience in FPGA/RTL design including architecture, RTL coding, verification, synthesis, and timing closure
  • Proficiency in SystemVerilog or Verilog for production FPGA development
  • Hands-on experience with FPGA + ARM SoC platforms (e.g., Xilinx/AMD Zynq or Zynq UltraScale+) and AMD/Xilinx toolchains (Vivado, Vitis, Petalinux)
  • Experience designing high-speed digital interfaces and DDR/DMA-based datapaths
  • Experience integrating FPGA logic with embedded software, including memory-mapped register interfaces and driver-level debugging
  • Hands-on hardware bring-up and lab debugging experience with oscilloscopes, logic analyzers, and embedded debug tools
  • Demonstrated ability to own open-ended design problems independently and carry them from hardware to flight
  • Hands-on experience in embedded systems, platform firmware, BMC development, or hardware bring-up engineering
  • Strong proficiency in C/C++ and Python
  • Deep understanding of platform initialization and boot architectures
  • Familiarity with hardware communication interfaces including I2C, SPI, UART, GPIO, and JTAG
  • Familiarity with FPGA or CPLD development workflows using Xilinx or Altera platforms
  • Master's degree in Electrical Engineering, Computer Engineering, or related discipline
  • Experience in aerospace, defense, semiconductor, or other high-reliability development environments
  • Experience with image sensor interfaces and camera pipelines (MIPI CSI-2, LVDS/SLVS, SubLVDS)
  • Familiarity with Versal ACAP architecture and/or Intel/Altera devices (Cyclone 10) and Quartus toolflows
  • Experience with simulation and verification tools such as Questa/ModelSim, Xcelium, or Verilator, and with UVM or other structured verification methodologies
  • Working knowledge of embedded Linux internals (device trees, kernel drivers) on ARM platforms
  • Proficiency with TCL for bring-up, test automation, and tooling
  • Experience with hardware-in-the-loop testing and automated regression of FPGA designs
  • Familiarity with fault-tolerant design and radiation effects mitigation (SEU scrubbing, TMR) for space applications
  • Experience with server platforms, PCIe initialization, remote management, secure boot, firmware attestation
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
61 Employees
Year Founded: 2024

What We Do

Cowboy Space Corporation is an orbital infrastructure company building a space-based power grid for artificial intelligence. They develop vertically integrated systems, including solar-powered GPU data centers in Low Earth Orbit and purpose-built launch vehicles. By integrating the data center directly into the rocket's upper stage, the company aims to provide high-performance AI compute at a scale and speed that surpasses terrestrial energy grid capacities.

Similar Jobs

CesiumAstro Logo CesiumAstro

Fpga Engineer

Aerospace • Hardware • Software • Defense
In-Office
El Segundo, CA, USA
400 Employees
118K-142K Annually

Muon Space Logo Muon Space

Fpga Engineer

Aerospace • Defense
In-Office
San Jose, CA, USA
150 Employees
184K-208K Annually

Cerebras Systems Inc. Logo Cerebras Systems Inc.

Fpga Engineer

Artificial Intelligence • Hardware • Software • Semiconductor
Hybrid
2 Locations
774 Employees
In-Office
Long Beach, CA, USA
679 Employees
102K-141K Annually

Similar Companies Hiring

Hanover Park Thumbnail
Artificial Intelligence • Fintech • Software • Financial Services
New York, New York
42 Employees
Outpost Space Thumbnail
Aerospace • Defense
US
24 Employees
Onshore Thumbnail
Artificial Intelligence • Fintech • Software • Financial Services
New York, New York
60 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account