Be an Early Applicant
The Role
Serve as SME for dimensional management and inspection strategy for HTS magnet production. Translate GD&T into manufacturable requirements, architect inspection systems, lead MSA/Gage R&R and SPC efforts, disposition NCRs with risk-informed decisions, create PFMEAs and quality plans, mentor QC inspectors, and stabilize processes through capability analysis to enable SPARC project production.
Summary Generated by Built In
About Commonwealth Fusion Systems:
Commonwealth Fusion Systems is on a mission to deliver the urgent transition to fusion energy.
Combining decades of research, top talent, and new technologies, we’re designing and building commercially viable fusion power plants. And we're working with policymakers and suppliers to build the energy industry of the future.
We’re in the best position to make it happen. Since 2018, we’ve raised nearly $3 billion in capital, making us the largest and leading private fusion company in the world.
Now we’re looking for more thinkers, doers, builders, and makers to join us. People who’ll bring new perspectives, solve tough problems, and thrive as part of a team.
If that’s you and this role fits, we want to hear from you.
Join the power movement as Staff Quality Engineer - Advanced Metrology Integration
Commonwealth Fusion Systems (CFS) is seeking a Staff Quality Engineer to serve as the subject matter expert (SME) for dimensional management and quality strategy for our HTS Magnet production and the SPARC Project. In this high-impact role, you will be the technical authority on Geometric Dimensioning and Tolerancing (GD&T), ensuring that novel, first-of-a-kind designs are translated into manufacturable and verifiable hardware.
In this capacity, you will act as the technical authority for translating novel, first-of-a-kind design requirements into manufacturable reality. You will partner closely with Engineering to understand design intent and work to better define GD&T requirements that are more manufacturable, while architecting the inspection systems, tooling, and process controls necessary for HTS Magnet production. Serving as the subject matter expert in GD&T, you will resolve complex fabrication challenges with risk-informed quality strategies that directly enable the SPARC project mission.
What you'll do:
- Partner closely with Engineering to understand design intent and define more manufacturable GD&T requirements; work directly with Manufacturing Engineers to determine how to achieve critical tolerances using existing equipment and novel fabrication methods
- Lead the development of risk-informed QA controls that bridge the gap between design intent and shop-floor reality to positively impact the CFS mission
- Architect measurement systems and quality inspection methods specifically designed for the assembly of large metallic components, moving beyond theoretical models to executable floor-level plans
- Provide risk-informed leadership to design engineers in dispositioning Non-Conformance Reports (NCRs) across the full range of outcomes (use-as-is, rework, repair, scrap), grounded in structural integrity and functional requirements
- Regularly analyze manufacturing data using control charts and process capability studies to identify emerging process drift, escalating insights to Operations to drive immediate process adjustments
- Facilitate the creation and execution of PFMEAs and Quality Plans for the installation of sub-systems, ensuring that assembly tolerances are managed as the SPARC project scales
- Lead advanced MSA and Gage R&R studies to ensure that the methods used to measure novel designs are statistically sound and repeatable in a production environment
- Provide technical coaching to QC Inspectors and Quality Engineers, specifically regarding GD&T interpretation on the shop floor
Mentorship & Oversight:
Measurement System Analysis (MSA):
Sub-system Integration:
Process Stabilization:
Disposition Leadership:
Inspection Architecture:
Proactive Problem Solving:
Manufacturing-Driven GD&T Interpretation:
What we’re looking for:
- Minimum 10+ years of Quality Engineering experience in a manufacturing, assembly or equipment manufacturing environment, specifically focused on transitioning new products to production
- Demonstrated program-level ownership of dimensional management or quality strategy, not solely execution of inspection plans defined by others
- Proven experience architecting inspection systems and measurement strategies for complex hardware, including defining what to measure, how, and to what acceptance criteria
- GD&T Expertise: Mastery of GD&T (ASME Y14.5) with a proven ability to translate theoretical tolerances into practical manufacturing work instructions
- Metrology: Deep knowledge of CMM, Romer Arm, and Laser tracker applied to complex geometries
- ISO 9001-2015, Six Sigma, Statistical Process Control (SPC), Process Capability Analysis, PFMEA, Measurement System Analysis (MSA), APQP
- GD&T and Metrology (Required)
- Knowledge of NDE (non-destructive evaluation) methods including dye penetrant, ultrasonic, eddy current, and x-ray (Preferred)
- Knowledge of cryogenics (Preferred)
- Minitab or JMP, MS Excel (including VBA), MS Visio
- Excellent communication and organization skills
Bonus points for:
- Manufacturing Experience: NPI in a low volume environment
- Mentorship & Oversight: Proven ability to provide technical coaching and indirect leadership to QC inspectors and quality engineering teams
- Statistical Tools: Proficiency in Minitab or JMP for conducting Process Capability Analysis and Six Sigma methodologies
Must-have Requirements:
- Ability to occasionally lift up to 50 lbs
- Willingness to travel or work required nights/weekends/on-call occasionally
- Perform activities such as stooping, climbing, typing, standing, or sitting for extended periods of time
- Work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, high current, pressure systems, and cryogenics
#LI-Onsite
At CFS, we excel in fast-paced environments, driven by our values of integrity, execution, impact, and self-critique. As we grow, we’re eager to bring on mission-driven folks who offer diverse perspectives and fresh ways to tackle challenges.
We value diversity deeply and are proud to be an equal opportunity employer by choice. We consider all qualified applicants equally, regardless of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law.
This role requires compliance with U.S. laws concerning the export of controlled or protected technologies or information (collectively, “Export Control Laws"). Any offer of employment will be contingent on the need for compliance with such Export Control Laws.
Skills Required
- Minimum 10+ years of Quality Engineering experience in manufacturing, assembly, or equipment manufacturing focused on new product introduction and transition to production.
- Program-level ownership of dimensional management or quality strategy (not solely executing inspection plans).
- Experience architecting inspection systems and measurement strategies for complex hardware, defining what to measure, how, and acceptance criteria.
- GD&T expertise (ASME Y14.5) and ability to translate theoretical tolerances into practical manufacturing work instructions.
- Metrology experience with CMM, Romer Arm, and Laser tracker applied to complex geometries.
- Knowledge and application of ISO 9001-2015, Six Sigma, SPC, Process Capability Analysis, PFMEA, Measurement System Analysis (MSA), and APQP.
- Proficiency with Minitab or JMP, MS Excel (including VBA), and MS Visio.
- Excellent communication and organization skills.
- Ability to occasionally lift up to 50 lbs.
- Willingness to travel or work required nights/weekends/on-call occasionally.
- Ability to perform stooping, climbing, typing, standing, or sitting for extended periods.
- Ability to work in a facility with industrial hazards (heat, cold, noise, fumes, strong magnets, lead, high voltage/current, pressure systems, cryogenics).
- Knowledge of NDE methods including dye penetrant, ultrasonic, eddy current, and x-ray.
- Knowledge of cryogenics.
- Experience providing technical coaching and indirect leadership to QC inspectors and quality engineering teams (mentorship).
Am I A Good Fit?
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.
Success! Refresh the page to see how your skills align with this role.
The Company
What We Do
Commonwealth Fusion Systems (CFS) has the fastest, lowest cost path to commercial fusion energy. CFS is collaborating with MIT to leverage decades of research combined with new groundbreaking high-temperature superconducting (HTS) magnet technology. HTS magnets will enable compact fusion power plants that can be constructed faster and at lower cost. CFS is now building SPARC, the world's first commercially relevant, net energy fusion demonstration device. SPARC will pave the way for the first fusion power plant, ARC, that will produce power on the grid. The ultimate mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. CFS has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by the world’s leading investors, CFS is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. If you are interested in joining our team, check out cfs.energy/careers for more information.
