Research Principal Mechanical Engineer

Posted 2 Days Ago
Be an Early Applicant
Milford, MA, USA
In-Office
Expert/Leader
Software • Biotech
The Role
Leads advanced mechanical engineering research for analytical and bioanalytical instrumentation. Designs precision mechanical, fluidic, electromechanical, and high-pressure systems; develops CAD, engineering models, simulations, prototypes, experiments, and technical documentation. Uses MATLAB or Python, CAD, FEA, data acquisition, and statistical methods to validate designs and reduce technical risk. Influences multidisciplinary architecture, mentors engineers, supports technology transfer, and contributes to new intellectual property.
Summary Generated by Built In
Overview

Waters Global Research is seeking an accomplished Principal Mechanical Engineer to advance the technologies behind next-generation analytical and bioanalytical instrumentation. This is a hands-on, career-level technical position for an engineer with demonstrated command of mechanical engineering fundamentals, modern design and analytical tools, and the judgment to solve complex problems where the path forward is not yet defined.


The engineer will contribute to research spanning liquid chromatography, fluid handling, precision mechanisms, detection, sample preparation and other instrumentation platforms. Working alongside scientists and specialists in electronics, software, optics and other disciplines, the Principal Mechanical Engineer will turn fundamental concepts into modeled, built and experimentally validated technologies that improve instrument sensitivity, reliability and scientific workflows. Success depends on both individual technical excellence and the ability to strengthen engineering decisions across the team—not on direct reports or a requirement to progress into management.

Responsibilities
  • Lead complex engineering design and problem solving: Independently define technical requirements, first-principles models, design constraints, assumptions and acceptance criteria for challenging research problems; assess alternatives quantitatively and recommend defensible solutions.
  • Design precision mechanical and fluidic systems: Develop mechanisms, assemblies, high-pressure fluid paths, pumps/valves/interfaces, seals, low-volume flow paths, sample-handling hardware and electromechanical systems; address dimensional control, thermal behavior, mechanical loads, material compatibility, reliability and precision assembly.
  • Own analysis and engineering models: Use MATLAB and/or Python to create engineering calculations, parameter studies, numerical models, test-data analysis and visualizations; apply first-principles structural, thermal, mechanical and fluidic analysis, supported by suitable simulation when useful, and validate important predictions against measurements.
  • Deliver high-quality CAD and design definitions: Produce and critically review parametric CAD, assemblies, drawings, tolerances, GD&T, interface definitions and engineering documentation; resolve tolerance stacks, manufacturability, assembly and serviceability issues.
  • Drive hands-on experimental learning: Plan and build prototypes and experimental apparatus; specify sensors, instrumentation and data acquisition; design decisive feasibility studies, analyze uncertainty and root causes, and use results to refine concepts and models.
  • Influence multidisciplinary system architecture: Integrate mechanical, fluidic, electrical, optical, thermal, firmware/software and scientific constraints; lead design reviews and interface/trade studies within areas of expertise.
  • Reduce technical risk and support technology transfer: Establish design margins, verification methods, failure modes and performance limits; provide clear technical records that enable reproducibility and eventual transition from Global Research into development.
  • Raise engineering capability: Serve as a trusted technical authority, mentor other engineers, share analytical and experimental methods and challenge assumptions constructively without relying on organizational authority.
  • Contribute to new technology and intellectual property: Identify opportunities for improved instrument performance, usability and scientific workflow; incorporate relevant Voice of the Customer insights and document innovations through reports, presentations and invention disclosures as appropriate.
Qualifications
  • Education: Bachelor’s degree in Mechanical Engineering or a closely related engineering discipline required. A master’s degree or PhD in mechanical engineering, fluid mechanics, applied mechanics, mechatronics, thermal sciences or a related technical field is advantageous.
  • Professional experience: Typically 10+ years of relevant experience with a bachelor’s degree, 8+ with a master’s, or 5+ with a PhD in precision equipment, advanced R&D, instrumentation or complex hardware development. Equivalent combinations of education and substantial demonstrated technical achievement may be considered, subject to HR policy.
  • Principal-level technical record: Demonstrated independent ownership of high-complexity designs or engineering investigations, including problem formulation, analytical tradeoffs, component/system design, prototype testing and sound technical decisions under uncertainty.
  • Engineering fundamentals: Advanced knowledge of at least one core specialty—such as mechanical design, fluid mechanics, thermal management, structures, precision mechanisms or electromechanical systems - combined with the ability to evaluate interactions across adjacent subsystems.
  • Hands-on capability and communication: Evidence of building and troubleshooting real hardware, interpreting test data, preparing technically rigorous reports and influencing multidisciplinary partners through clear engineering reasoning.

The successful candidate must be able to select and effectively use the right engineering tools - not simply list exposure to software packages. Expected capabilities include:

  • 3D CAD and engineering drawings: Advanced proficiency with parametric 3D CAD and complex assemblies; SolidWorks preferred, with Siemens NX, Creo or equivalent experience valued. Able to produce production-quality drawings, GD&T, tolerance analyses and design documentation.
  • MATLAB / numerical computing: Demonstrated proficiency in MATLAB and/or Python for engineering calculations, numerical modeling, parameter sweeps, processing and visualization of experimental data, and efficient analysis workflows. Strong hands-on MATLAB experience is particularly valuable for this role.
  • Engineering analysis and simulation: Demonstrated ability to perform defensible engineering calculations and use FEA or other appropriate engineering simulations when relevant; establish credible assumptions, loads and boundary conditions; interpret sensitivity and limitations; and validate important predictions with physical measurements. Tools may include ANSYS Mechanical, SolidWorks Simulation or equivalents. Engineering judgment matters more than expertise in one solver.
  • Experimental software and data acquisition: Experience with LabVIEW, National Instruments DAQ, MATLAB toolboxes, Python-based instrument interfaces or comparable acquisition and control environments for automated experiments and test-data analysis.
  • System modeling and engineering workflow: Familiarity with Simulink, structured design of experiments (DOE), statistical analysis, PLM/PDM workflows and controlled technical documentation.

Preferred domain experience

  • Fluidics and analytical instrumentation: High-pressure liquid systems, chromatography, precision pumps, valves, fittings, seal design, microfluidics, low-dead-volume flow paths, bio-compatible or chemically resistant wetted materials, sample handling or separation technologies.
  • Related precision instrumentation: Mass spectrometry, vacuum hardware, optomechanics, spectroscopy, bioanalytical instrumentation, medical devices, semiconductor equipment, robotics or other complex electromechanical or scientific instruments.
  • Research-to-development practice: Early-stage technical feasibility studies, root-cause investigations, metrology and reliability planning, supplier/manufacturing collaboration, and transfer of validated prototype architectures into a development organization; experience translating scientific or customer workflow needs into engineering requirements is valued.

We know that sometimes the perfect candidate does not exist, and that people can be put off applying for a job if they do not fit all the requirements. If you are excited about working for us and have most of the skills or experience we are looking for, please go ahead and apply. You could be just what we need! We believe strongly in the value of diversity and creating supportive, inclusive environments where our colleagues can succeed. As such, Waters is proud to be an Equal Opportunity Employer and is committed to maintaining a diverse and inclusive work environment.

Company Description

Waters Corporation (NYSE:WAT)  is a global leader in life sciences and diagnostics, dedicated to accelerating the benefits of pioneering science through analytical technologies, informatics, and service. With a focus on regulated, high-volume testing environments, our innovative portfolio harnesses deep scientific expertise across chemistry, physics, and biology. We collaborate with customers around the world to advance the release of effective, high-quality medicines, ensure the safety of food and water, and drive better patient outcomes by detecting diseases earlier, managing routine infections, and combating antibiotic resistance. Through a shared culture of relentless innovation, our passionate team of ~16,000 colleagues turn scientific challenges into breakthroughs that improve lives worldwide.  




Diversity and inclusion are fundamental to our core values at Waters Corporation. It benefits our employees, our products, our customers and our community. Waters complies with all applicable federal, state, and local laws. Qualified applicants are considered without regard to sex, race, color, ancestry, national origin, citizenship status, religion, age, marital status (including civil unions), military service, veteran status, pregnancy (including childbirth and related medical conditions), genetic information, sexual orientation, gender identity, legally recognized disability, domestic violence victim status, or any other characteristic protected by law. Waters is proud to be an equal opportunity workplace and is an affirmative action employer. All hiring decisions are based solely on qualifications, merit, and business needs at the time.

Skills Required

  • Bachelor's degree in Mechanical Engineering or a closely related engineering discipline
  • Typically 10+ years of relevant experience with a bachelor's degree, 8+ with a master's, or 5+ with a PhD
  • Independent ownership of high-complexity designs or engineering investigations
  • Advanced knowledge of at least one core specialty such as mechanical design, fluid mechanics, thermal management, structures, precision mechanisms, or electromechanical systems
  • Experience building and troubleshooting real hardware, interpreting test data, preparing technical reports, and influencing multidisciplinary partners
  • Advanced proficiency with parametric 3D CAD, complex assemblies, production-quality drawings, GD&T, and tolerance analysis
  • Proficiency in MATLAB and/or Python for engineering calculations, numerical modeling, parameter studies, data processing, and visualization
  • Ability to perform engineering calculations and use FEA or other appropriate engineering simulations
  • Experience with LabVIEW, National Instruments DAQ, MATLAB toolboxes, Python-based instrument interfaces, or comparable systems
  • Familiarity with Simulink, design of experiments, statistical analysis, PLM/PDM workflows, and controlled technical documentation
  • Master's degree or PhD in mechanical engineering, fluid mechanics, applied mechanics, mechatronics, thermal sciences, or a related technical field
  • SolidWorks experience
  • Siemens NX, Creo, or equivalent CAD experience
  • Experience with fluidics and analytical instrumentation, including high-pressure liquid systems, chromatography, pumps, valves, seals, microfluidics, or sample handling
  • Experience with related precision instrumentation such as mass spectrometry, vacuum hardware, optomechanics, spectroscopy, medical devices, semiconductor equipment, robotics, or scientific instruments
  • Research-to-development experience involving feasibility studies, root-cause investigations, metrology, reliability planning, manufacturing collaboration, or technology transfer
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Milford, MA
7,595 Employees

What We Do

Waters Corporation (NYSE: WAT), a global leader in analytical instruments and software, has pioneered chromatography, mass spectrometry, and thermal analysis innovations serving the life, materials, food, and environmental sciences for more than 60 years. With more than 7,800 employees worldwide, Waters operates directly in 35 countries, including 14 manufacturing facilities, and with products available in more than 100 countries. Learn more at www.waters.com.

Similar Jobs

T-Mobile Logo T-Mobile

Account Executive

Other • Utilities
In-Office or Remote
2 Locations
89016 Employees
43K-78K Annually

PwC Logo PwC

Risk & Reg Consulting - Regulatory Reporting/Capital Director

Artificial Intelligence • Professional Services • Business Intelligence • Consulting • Cybersecurity • Generative AI
Hybrid
4 Locations
370000 Employees
155K-410K Annually

PwC Logo PwC

Cloud Engineer

Artificial Intelligence • Professional Services • Business Intelligence • Consulting • Cybersecurity • Generative AI
Hybrid
68 Locations
370000 Employees
61K-100K Annually

PwC Logo PwC

AI Productivity & Adoption Lead

Artificial Intelligence • Professional Services • Business Intelligence • Consulting • Cybersecurity • Generative AI
Hybrid
69 Locations
370000 Employees
99K-232K Annually

Similar Companies Hiring

Ford Energy Thumbnail
Automotive • Software • Energy • Utilities • Manufacturing • Renewable Energy
US
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees
Blee Thumbnail
Artificial Intelligence • Marketing Tech • Software
New York, New York
33 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account