Low Earth orbit is open for business. Varda is accelerating the development of commercial space infrastructure, from in-orbit pharmaceutical processing to reliable and economical reentry capsules. Varda’s W-Series vehicles are built, designed, and operated by Varda in-house, including the pharmaceutical processing payloads, the capsules, the C-PICA heat shields, and the satellite buses.
From life-saving pharmaceuticals to more powerful fiber optics, there is a world of products used on Earth today that can only be manufactured in space. Varda is accelerating innovation in the orbital economy by creating both the products and infrastructure needed so space can directly benefit life on Earth. Our mission is to expand the economic bounds of humankind.
Our team is uniquely suited to accomplishing this goal, with leadership and staff comprised of veterans from SpaceX, Blue Origin, major pharmaceutical companies and Silicon Valley. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital.
Varda is headquartered in El Segundo, California, where we have offices and a production facility where our vehicles, equipment, and materials are built, integrated, and tested. Varda also has offices in Washington, DC and Huntsville, AL.
Join Varda, and work to create a bustling in-space ecosystem.
About This Role
Varda is hiring an experienced Propulsion Components Engineer to join the team that designs, builds, tests, and flies the fluid components on the W-Series satellite bus and future vehicles. The W-Series satellite incorporates a high-test hydrogen peroxide (HTP) and hydrocarbon bipropellant propulsion system with high-pressure inert gas pressurization and cold-gas attitude control. The component portfolio spans each of these fluid subsystems and includes solenoid control valves, check valves, relief valves, burst disks, fluid filters, regulators, manually operated service valves, machined fluid manifolds, and instrumentation including pressure transducers and RTDs. A successful candidate will take on a significant share of the component ownership for these mission-critical hardware articles as responsible engineer, helping expand component capabilities, improve reliability, and increase flight cadence.
Many current Varda components are purchased parts, and you will be a primary technical interface to our suppliers. Varda also intends to bring more component design in-house for current and future vehicles, and you will help lead that transition: shaping make-versus-buy decisions, executing detailed design, and standing up the capabilities to develop, qualify, produce, acceptance test, and fly Varda-owned parts. As part of a broad, multi-disciplinary engineering team, you will interface daily with propulsion systems, structures, production, thermal, avionics, and GNC engineers and technicians. You will inherit an operational, well-documented component baseline and drive improvements alongside the team. The role is hands-on: test stand development and operations, production floor support, occasional supplier visits, and issue or anomaly investigations as required. Bring your experience and passion, and let’s build something amazing. Open to Senior or Principal level candidates.
Responsibilities
- Serve as responsible engineer for a significant portion of the bus propulsion component portfolio, from requirements and specification generation through development, qualification, production, and flight, in partnership with the broader engineering team
- Design Varda-owned propulsion components: CAD, detailed drawings with GD&T per ASME Y14.5, tolerance analysis, seal and spring design, and supporting structural and fluid analysis
- Specify, source, and qualify purchased components; serve as a technical lead with suppliers, review qualification and acceptance data, and drive corrective action and/or second sourcing
- Author and execute acceptance and qualification test (ATP/QTP) campaigns per SMC-S-016; characterize component performance across the pressure and temperature envelope and feed results back into system requirements; document results with clear test reports
- Support vehicle build, integration and test, and flight operations: disposition nonconformances and lead component issue or anomaly investigations to root cause and closure
- Represent your components in design reviews, FMEAs, hazard analyses, and range safety interactions; contribute to the shared component knowledge base, qualification records, and lessons learned
- Mentor engineers and help set the component design and test standards the propulsion team relies and builds on
Basic Qualifications
- B.S. in Aerospace Engineering, Mechanical Engineering, or a related discipline; equivalent professional experience considered (typically 3–6+ years)
- 3+ years of hands-on experience designing, qualifying, or owning fluid components (valves, regulators, filters, burst disks, manifolds, transducers) for spacecraft, launch vehicles, or comparable high-pressure hardware, on either the vehicle or the component-supplier side (typically 6+ years for Principal)
- Working understanding of component design fundamentals: sealing, force balance, spring sizing, friction, flow paths, materials compatibility, material finishes, and wear
- Mechanical design proficiency: CAD, assembly management using PLM software, detailed drawings with GD&T per ASME Y14.5, and tolerance analysis
- Experience with component pressure and leak testing and ATP/QTP execution per SMC-S-016 or an equivalent standard, including authoring procedures and establishing pass/fail criteria
- Hands-on experience building and testing pressurized hardware alongside technicians
- Proven record of technical ownership: driving nonconformances and anomalies to root cause and corrective action across teams and suppliers
- Willingness to travel to suppliers and test sites as needed (typically < 10% of time)
Preferred Skills and Experience
- 6+ years of spacecraft or launch vehicle fluid component experience, including clean-sheet design of a valve, regulator, or similar component through qualification and flight (typically 6–10+ years for Principal)
- Experience with low-leakage, on-orbit propulsion components and with HTP, other strong oxidizers, or high-pressure gas systems
- Analysis skills for component design: FEA of pressure-containing parts, 1D fluid network modeling, valve dynamics, and fatigue and fracture control
- Electromechanical and instrumentation fundamentals: solenoid valve coil and driver interfaces, and pressure transducer and RTD calibration, excitation, and error budgets
- Supplier management for COTS and build-to-print aerospace components: source selection, audits, and data package review
- Familiarity with AIAA S-080 and S-081 and AFSPCMAN 91-710 range safety requirements
- Knowledge of precision manufacturing and inspection for fluid hardware: machining and deburring, welding, electropolish, precision cleaning, CMM, and NDE
- Experience standing up testing capabilities for propulsion components (dev, qual, ATP), particularly in a high-cadence, high component throughput environment.
- Prior experience leading a technical sub-discipline, formally or informally, and developing engineering standards within a propulsion organization
- Exceptional technical communication skills, precision and clarity in specifications, test procedures, data package reviews, and engineering memos
Pay Range
- Salary Range:
- Senior (typically 3–6+ years): $140,333 – $179,314/per year
- Principal (typically 6–10+ years): $181,913 – $232,444/per year
- This role is on-site in El Segundo, CA
- Leveling and base salary is determined by job-related skills, education level, experience level, and job performance
- You will be eligible for incentives in the form of stock options and/or long-term cash awards
Varda, like all employers, must ensure that its employees working in the United States are lawfully authorized to work in the U.S. Additionally, our employees are exposed to and have access to certain export-controlled items. Because our employees are provided access to export-controlled items, our policy is to only hire “U.S. persons” who are permitted to have access to our technology without an export license.
“US person” means: U.S. citizen, U.S. lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) (i.e., individual admitted to the U.S. as a refugee or granted asylum).
Varda Space Industries, Inc. participates in the U.S. Department of Homeland Security E-Verify program. The E-Verify program is an Internet-based employment eligibility verification system operated by the U.S. Citizenship and Immigration Services. Learn more about the E-Verify program.
E-Verify Notice Right To Work Notice
Read more Read more
Varda Space Industries is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, martial status, mental or physical disability, or any other legally protected status.
Skills Required
- Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, or equivalent professional experience
- 3+ years of hands-on experience designing, qualifying, or owning fluid components for spacecraft, launch vehicles, or comparable high-pressure hardware
- Understanding of sealing, force balance, spring sizing, friction, flow paths, materials compatibility, finishes, and wear
- Mechanical design proficiency with CAD, PLM software, detailed drawings, GD&T per ASME Y14.5, and tolerance analysis
- Experience with component pressure and leak testing and ATP/QTP execution per SMC-S-016 or equivalent
- Hands-on experience building and testing pressurized hardware with technicians
- Technical ownership of nonconformances and anomalies through root cause and corrective action
- Willingness to travel to suppliers and test sites as needed
- 6+ years of spacecraft or launch vehicle fluid component experience, including clean-sheet design through qualification and flight
- Experience with low-leakage, on-orbit propulsion components, HTP, strong oxidizers, or high-pressure gas systems
- Component design analysis experience including FEA, 1D fluid network modeling, valve dynamics, and fatigue or fracture control
- Electromechanical and instrumentation experience with solenoid valves, pressure transducers, and RTDs
- Supplier management experience for COTS and build-to-print aerospace components
- Familiarity with AIAA S-080, AIAA S-081, and AFSPCMAN 91-710 range safety requirements
- Knowledge of precision manufacturing and inspection for fluid hardware
- Experience establishing propulsion component development, qualification, and acceptance testing capabilities
- Experience leading a technical sub-discipline and developing engineering standards
What We Do
Varda Space Industries was founded in 2020 with the goal of manufacturing products in space to benefit life on Earth. Co-founders Will Bruey and Delian Asparouhov imagined a world where space could be leveraged not only for storytelling and awe, but for its economic benefits. Varda was created as a platform for in-space manufacturing, with a range of real-life, on-Earth use cases. Today, we are accelerating innovation in space through our microgravity manufacturing platform, with applications including pharmaceuticals, hypersonic testing, and fiber optics. Varda is headquartered in El Segundo, California and has received venture funding from investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital.
Gallery
