Manufacturing Engineer

Posted 13 Minutes Ago
Be an Early Applicant
Alpharetta, GA, USA
In-Office
60K-80K Annually
Senior level
Industrial • Manufacturing
The Role
Manufacturing Engineer responsible for improving assembly and production processes through lean methods, process analysis, line balancing, workstation and facility layout design, automation assessment, root-cause analysis, and continuous improvement. The role uses Creo and Teamcenter, supports production and cross-functional teams, manages improvement projects, and advances safety, quality, reliability, cost, and throughput at an onsite manufacturing facility.
Summary Generated by Built In

RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking an experienced candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer’s world-class engineering and manufacturing facility in Alpharetta, Georgia. 

This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. 

Manufacturing Engineer 

Manufacturing Engineer will drive continuous improvement across assembly, fabrication, and plant-support processes. This position will evaluate manufacturing operations end to end, apply lean principles to eliminate waste and improve flow, design line layouts and production setups, and improve equipment and process reliability. The engineer will work closely with operations, maintenance, quality, safety, product engineering, facilities engineering, production support, and suppliers to deliver measurable improvements in safety, quality, cost, and throughput. 

Job Responsibilities 

  • Work closely with the manufacturing floor to observe processes, gather data, and identify waste, bottlenecks, quality concerns, and safety or ergonomic risks. 
  • Analyze and improve assembly and manufacturing processes, including cycle time, line balancing, standard work, work instructions, workflow, and material handling. 
  • Lead lean and continuous-improvement activities, including kaizen events, value stream mapping, 5S, error-proofing, and flow improvements. 
  • Perform time, motion, methods, and speed studies to establish production rates and improve operating efficiency. 
  • Design line layouts, workstations, fixtures, and production setups; create and review models and drawings in Creo and manage engineering data in Teamcenter. 
  • Interpret engineering drawings, schematic diagrams, specifications, and formulas and collaborate with engineering and management to establish quality and reliability standards. 
  • Review worker logs, processing sheets, and specification sheets to verify compliance with quality-assurance requirements. 
  • Prepare charts, graphs, diagrams, and reports illustrating workflow, routing, floor layouts, material handling, machine utilization, and deviations from existing standards. 
  • Monitor equipment and process performance and lead root-cause analysis and corrective actions for quality and reliability issues. 
  • Plan and manage process-improvement projects, including scope, cost, schedule, implementation, and status reporting to leadership. 
  • Evaluate manual operations and identify automation opportunities that improve ergonomics, safety, quality, and productivity. 
  • Support production daily and provide technical guidance to production-support personnel and other cross-functional partners. 

Job Requirements 

  • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Automation Engineering, Industrial Engineering, or a related engineering discipline; equivalent directly relevant experience may be considered. 
  • Five to seven years of hands-on manufacturing engineering experience. An associate degree may be considered with nine or more years of directly relevant manufacturing engineering experience. 
  • Experience applying lean manufacturing and continuous-improvement methods in assembly or production operations. 
  • Experience with process analysis, line layouts, production setups, workstation design, and manufacturing flow improvement. 
  • Professional experience using Creo and Teamcenter, or closely comparable CAD and product lifecycle management tools. 
  • Ability to read and interpret blueprints, technical drawings, schematics, specifications, and computer-generated reports. 
  • Ability to manage multiple projects and priorities and work effectively across production, maintenance, engineering, quality, safety, and supplier teams. 
  • Ability to work full time onsite and spend approximately 60% of the workweek on the manufacturing floor while following plant safety and PPE requirements. 

Preferred Qualifications 

  • Experience with AutoCAD or factory-layout software. 
  • Experience identifying or implementing manufacturing automation opportunities. 
  • Experience with time studies, line balancing, and production-rate development. 
  • Experience managing manufacturing or capital-improvement projects. 
  • Experience with structured root-cause and quality tools, including 8D, 5 Why, and PFMEA. 
  • Lean or Six Sigma certification. 
  • Experience in switchgear, control panels, engines, generator sets, heavy equipment, or other complex-product assembly. 
  • Experience coaching or mentoring technical staff and influencing cross-functional teams without direct authority. 

Visa sponsorship is not available for this position. 

Pay Range: $60,000 - $80,000 Commensurate with experience 

About RFA Engineering 

RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. 

Competitive Benefits 

  • Health and Dental Insurance 
  • TelaDoc Healthiest You 
  • Supplemental Vision Insurance 
  • Company Paid Life Insurance 
  • Company Paid Long-Term Disability 
  • Short-term Disability 
  • Retirement Savings Account (Traditional 401k & Roth 401k) 
  • Flexible Spending Plan Dependent Care 
  • HSA for Medical Expenses 
  • Bonus Plan (Exempt Employees Only) 
  • Paid Time Off (PTO) 
  • Paid Holidays 
  • Bereavement Leave 
  • Employee Assistance Programs (EAP) 
  • Education Assistance 

Equal Opportunity and Veteran Friendly 

Qualifications Education Preferred Bachelors of Science or better. Bachelors of Science or better. Bachelors of Science or better. Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Skills Required

  • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Automation Engineering, Industrial Engineering, or a related engineering discipline; equivalent relevant experience may be considered.
  • Five to seven years of hands-on manufacturing engineering experience.
  • Associate degree may be considered with nine or more years of directly relevant manufacturing engineering experience.
  • Experience applying lean manufacturing and continuous-improvement methods in assembly or production operations.
  • Experience with process analysis, line layouts, production setups, workstation design, and manufacturing flow improvement.
  • Professional experience using Creo and Teamcenter, or comparable CAD and product lifecycle management tools.
  • Ability to read and interpret blueprints, technical drawings, schematics, specifications, and computer-generated reports.
  • Ability to manage multiple projects and priorities and collaborate across production, maintenance, engineering, quality, safety, and supplier teams.
  • Ability to work full time onsite and spend approximately 60% of the workweek on the manufacturing floor while following plant safety and PPE requirements.
  • Experience with AutoCAD or factory-layout software.
  • Experience identifying or implementing manufacturing automation opportunities.
  • Experience with time studies, line balancing, and production-rate development.
  • Experience managing manufacturing or capital-improvement projects.
  • Experience with structured root-cause and quality tools, including 8D, 5 Why, and PFMEA.
  • Lean or Six Sigma certification.
  • Experience in switchgear, control panels, engines, generator sets, heavy equipment, or other complex-product assembly.
  • Experience coaching or mentoring technical staff and influencing cross-functional teams without direct authority.
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Eden Prairie, MN
438 Employees
Year Founded: 1961

What We Do

RFA serves 100's of clients ranging in size from Fortune 500 to entrepreneurial start-ups. We deliver engineering services from our Engineering Center in Eden Prairie, MN and at our client’s own facilities. Regardless of the manner which we deliver services, our goal is to please our clients, through consistent value of services which are aligned to the standards of our clients. We strive to work as a transparent extension of our client’s own engineering staff. We work in all areas of mechanical, software and electrical design, including off-highway mobile equipment and mechanical power transmission, consumer, recreational, industrial, medical products and one-of-a-kind special manufacturing machines. To see a complete listing of our open positions, please go to http://www.rfamec.com/careers/career-opportunities.html

Similar Jobs

RFA Engineering Logo RFA Engineering

Manufacturing Engineer

Industrial • Manufacturing
In-Office
Alpharetta, GA, USA
438 Employees
90K-110K Annually

Dover Corporation Logo Dover Corporation

Manufacturing Engineer

Other • Industrial • Manufacturing • Industrial Equipment
In-Office
Ball Ground, GA, USA
5562 Employees

Dover Corporation Logo Dover Corporation

Manufacturing Engineer

Other • Industrial • Manufacturing • Industrial Equipment
In-Office
Conyers, GA, USA
5562 Employees
89K-89K Annually

Dover Corporation Logo Dover Corporation

Manufacturing Engineer

Other • Industrial • Manufacturing • Industrial Equipment
In-Office
2 Locations
5562 Employees

Similar Companies Hiring

Fortune Brands Innovations Thumbnail
Manufacturing
Deerfield, IL
10000 Employees
Amalgamated Sugar Thumbnail
Food • Greentech • Agriculture • Industrial • Manufacturing
Boise, Idaho
768 Employees
Ford Energy Thumbnail
Automotive • Software • Energy • Utilities • Manufacturing • Renewable Energy
US

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account