Manufacturing Engineer I

Posted 4 Days Ago
Be an Early Applicant
Colorado Springs, CO, USA
In-Office
70K-77K Annually
Entry level
Aerospace • Defense • Industrial • Manufacturing
The Role
Supports daily manufacturing operations through production troubleshooting, process improvement, equipment development, and manufacturability reviews. Develops routings, bills of materials, work instructions, PFMEAs, tools, fixtures, and process documentation. Reviews engineering changes and drawings using GD&T principles, supports equipment qualification, and assists with new product introduction. The role requires hands-on collaboration with engineering, operations, and plant personnel in a precision manufacturing environment.
Summary Generated by Built In

Reports to:  Manufacturing Engineering Manager/Supervisor

Department: Manufacturing Engineering


Job Summary: 


This is a typical Manufacturing Engineering role that requires a “hands-on” approach to actively support day to day production needs such as resolving production issues, reviewing Bills of Materials, Routers, costing, Engineering Change Orders and Engineering Orders. To implement process improvement, as well as sustaining and development initiatives (including tools, jigs, fixtures and manual machines). The incumbent will look for continuous improvement opportunities and support projects focused on the maintenance, upgrading, specification of, and installation of machines and equipment. 


About Bal Seal: Bal Seal Engineering delivers advanced sealing, connecting, and contact solutions that serve medical, aerospace, energy, and industrial markets. Our proprietary spring-energized seals and electrical contacts help customers achieve precision, efficiency, and reliability. Employees thrive in a culture that values craftsmanship, technical mastery, and close partnership with customers solving complex challenges.


Essential Duties and Responsibilities:

 

  • May be required to review designs for manufacturability and cost (DFM/A)
  • Assist in the design and/or sourcing, validation and qualification of new manufacturing equipment 
  • Review and Interpretation of engineering drawings per ASME Y14.5
  • Ability to drive to root cause, provide short and long-term corrective solutions
  • Develop and support Continuous Improvement Initiatives
  • Provide day to day troubleshooting assistance and support for Engineering and Operations
  • May be required to establish routings, BoMs, processes, layouts, tools, costs, and labor standards for manufacturing processes 
  • Development of supporting documentation including PFMEAs, drawings, work instructions, procedures, tools/jigs/fixtures, and processes to support new product introduction 
  • Documentation of legacy production equipment and "tribal knowledge" processes 
  • Review, initiate and assess Engineering Change Orders, Engineering Orders, drawing and process deviations
  • Perform other related duties as assigned


Education: 

 

  • Bachelor’s degree in Mechanical Engineering or equivalent technical degree
  • Other technical qualifications and/or a demonstrated minimum 3 years' experience in a similar technical environment may be considered

 

 

Experience: 

 

  • Experience assisting with Continuous Improvement, Lean initiatives, developing and implementing Process Capability studies preferred
  • Experience with machining small and medium sized precision components made from a variety of polymers and metals preferred
  • Experience with Laser welding processes and techniques a plus
  • Experience with 3D modeling software Solidworks and/or Inventor preferred
  • 6-Sigma Yellow or Green Belt certification desired
  • Strong computer skills and analytical skills


 Knowledge, Skills and Abilities:


  • Working knowledge of GD&T interpretation and implementation per ASME Y14.5
  • Base knowledge in inspection tools and methods 
  • Base knowledge of Manufacturing Methods and Processes 
  • Knowledge of statistical process control preferred 
  • Ability to effectively and safely utilize various hand and power tools
  • Knowledge of machine elements (i.e. fasteners, bearings, gear and belt drive etc.) preferred
  • Must be able to work in a highly collaborative environment
  • Must be hands on and interface with plant personnel and operators
  • Ability to identify and solve problems with little direction or assistance
  • Ability to utilize ERP/MRP and PLM/PDM systems
  • Working knowledge of and ability to utilize CAD systems preferred
  • Base knowledge of metallurgy (i.e. material strength, hardness, machinability, heat treatment processes)
  • Basic Project Management skills
  • Must have excellent verbal and written communication skills



Physical Requirements: 


  • Employee is occasionally required to stand
  • While performing the duties of this job, the employee is occasionally required to walk
  • This position is mainly sedentary; Therefore, required to sit
  • Occasionally will need to bend, stoop and squat
  • Frequent lifting and/or moving up to 10 pounds and occasionally lift and/or move up to 25 pounds
  • Required to reach with hands and arms to handle documents and products
  • Must be able to enter data into a computer by use of a keyboard and mouse 
Work Environment:


  • The work environment conditions are typical of a manufacturing environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the basic functions. The noise level in the work environment ranges from quiet to moderate, however, hearing protection may be required if employee enters high noise areas as a part of their normal job duties.


Benefits:

At Bal Seal Engineering (BSE) we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work.


BSE is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources.


This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Skills Required

  • Bachelor's degree in Mechanical Engineering or an equivalent technical degree
  • Three years of experience in a similar technical environment may be considered as an alternative technical qualification
  • Ability to interpret engineering drawings according to ASME Y14.5 and apply GD&T
  • Base knowledge of manufacturing methods and processes
  • Base knowledge of inspection tools and methods
  • Ability to use ERP/MRP and PLM/PDM systems
  • Strong computer, analytical, verbal, and written communication skills
  • Ability to work collaboratively with plant personnel and operators
  • Ability to identify and solve problems with limited direction
  • U.S. person status as defined by ITAR due to access to controlled information
  • Experience with continuous improvement and Lean initiatives
  • Experience developing and implementing process capability studies
  • Experience machining precision polymer and metal components
  • Experience with laser welding processes and techniques
  • Experience using SolidWorks and/or Inventor
  • Six Sigma Yellow or Green Belt certification
  • Knowledge of statistical process control
  • Knowledge of machine elements and metallurgy
  • Working knowledge of CAD systems
  • Basic project management skills
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Long Beach, CA
550 Employees
Year Founded: 1985

What We Do

Sanders Industries Holdings manufactures highly engineered elastomeric tooling for large composite structures and elastomeric components for aerospace and defense original-equipment and maintenance, repair, and overhaul applications. Its products include seals, gaskets, ablatives, EMI/RFI and thermal shielding, encapsulated O-rings, and composite APU plenums and ducts. Through its divisions, it designs and engineers custom products from advanced materials to tight tolerances for high-performance markets.

Similar Jobs

In-Office
Centennial, CO, USA
845 Employees
65K-75K Annually

Nevada Heat Treating Logo Nevada Heat Treating

Manufacturing Engineer

Aerospace • Defense • Industrial • Manufacturing
In-Office
Longmont, CO, USA
90 Employees
72K-100K Annually
In-Office
4 Locations
10001 Employees
69K-105K Annually
In-Office
8 Locations
10001 Employees
69K-105K Annually

Similar Companies Hiring

Outpost Space Thumbnail
Aerospace • Defense
Los Angeles, California
38 Employees
Ford Energy Thumbnail
Automotive • Software • Energy • Utilities • Manufacturing • Renewable Energy
US
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account