Design Engineer IV (Automation Controls)

Posted 26 Minutes Ago
Be an Early Applicant
Manor, TX, USA
In-Office
Expert/Leader
Semiconductor • Industrial • Manufacturing
The Role
Designs, develops, commissions, troubleshoots, and supports automated manufacturing and test systems using Mitsubishi PLCs, HMIs, industrial networks, motion systems, robotics, and related equipment. Responsibilities include documentation, equipment upgrades, root cause analysis, FAT/SAT participation, continuous improvement, regulatory compliance, cross-functional collaboration, and mentoring junior personnel. The role supports manufacturing operations in office, cleanroom, and industrial environments and may require extended out-of-town travel.
Summary Generated by Built In

 Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!  

UCT is looking for a talented Design Engineer IV to join us in Austin, TX! 

We are seeking a highly experienced Senior PLC Programmer / Automation Controls Engineer with a minimum of 10 years of hands-on experience in industrial automation, controls engineering, machine integration, and manufacturing equipment support. The ideal candidate will possess extensive expertise in Mitsubishi PLC programming, GT Designer3 HMI development, control system architecture, and equipment commissioning. 

This position will play a key role in the design, development, implementation, and support of automated manufacturing and test systems. The successful candidate will work closely with electrical, mechanical, test, and manufacturing engineering teams to improve equipment reliability, productivity, and overall system performance.

Experience with National Instruments LabVIEW and/or Mechatronics is considered a strong plus but is not required. Chemical delivery, including fluid process flow control, also a plus.

Essential Duties and Responsibilities:

  • Design, develop, test, and maintain control systems using Mitsubishi PLC platforms and Mitsubishi GX software.
  • Develop and maintain operator interfaces and HMI applications using GT Designer3 and Mitsubishi GOT platforms.
  • Perform machine commissioning, startup, validation, and production support activities.
  • Troubleshoot and resolve equipment, controls, and communication issues on manufacturing systems.
  • Integrate PLC systems with servo drives, motion controllers, VFDs, industrial networks, sensors, vision systems, and robotic equipment.
  • Develop and maintain control system documentation, including software revisions, control narratives, operating procedures, and technical specifications.
  • Support continuous improvement initiatives focused on productivity, quality, reliability, and safety.
  • Collaborate with cross-functional teams on equipment upgrades, capital projects, and new product introductions.
  • Conduct root cause analysis and implement corrective actions for equipment failures.
  • Participate in design reviews, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT).
  • Provide technical guidance and mentorship to junior engineers, technicians, and maintenance personnel.
  • Ensure compliance with company engineering standards and applicable industry regulations.

Knowledge, Skills and Abilities: 

  • Experience with industrial communication protocols
    • Ethernet/IP
    • Modbus TCP/IP
    • CC-Link
    • OPC UA
    • TCP/IP
    • RS-232 / RS-485
  • Ability to read, interpret and create electrical schematics, wiring diagrams, panel layouts, technical drawings, and P&ID schematics.
  • Strong troubleshooting, problem-solving, and analytical skills.
  • Excellent written and verbal communication skills.
  • Ability to manage multiple projects and priorities in a fast-paced manufacturing environment.

Educational/Certification Requirement:  

  • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics Engineering, Automation Engineering, or a related technical field. Equivalent industry experience may be considered.

Experience Requirement:

Work Experience: 

  • Minimum 10 years industrial automation and/or PLC programming experience
  • Advanced knowledge of Mitsubishi PLC Platforms including MELSEC, iQR Series and iQF series
  • Strong proficiency with GX Works (all versions), and GT Designer.
  • Experience developing and maintaining Mitsubishi GOT HMI applications.

Physical Demands and Working Conditions:

Criteria:

Work Environment: 

  • Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.
  • Work is performed primarily in a standard office environment.

Physical Demands : 

  • Ability to climb, stoop, kneel, crouch, reach, walk, push, pull and grasp.
  • Ability to lift up to 25 lbs. with or without assistance.
  • Ability to move arms, hands and fingers.
  • Required to have visual acuity to perform assigned tasks.

 

Environmental Exposure: 

  • Ability to sit or stand for sustained periods of time.
  • Work in a manufacturing, office and/or cleanroom environment.
  • Subject to hazards including electrical current, moving mechanical parts, and exposure to chemicals.
  • Subject to frequent interruptions.
  • Required to wear personal protective equipment where applicable.

Overnight Travel:  

  • Work may require out-of-town travel depending upon assignment (training and meeting)
  • Extended travel may be required but should not exceed 3 weeks per trip.

Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. 

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Skills Required

  • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics Engineering, Automation Engineering, or a related technical field; equivalent industry experience may be considered.
  • Minimum 10 years of industrial automation and/or PLC programming experience.
  • Advanced knowledge of Mitsubishi PLC platforms, including MELSEC, iQ-R, and iQ-F series.
  • Strong proficiency with GX Works and GT Designer.
  • Experience developing and maintaining Mitsubishi GOT HMI applications.
  • Experience with industrial communication protocols including Ethernet/IP, Modbus TCP/IP, CC-Link, OPC UA, TCP/IP, RS-232, and RS-485.
  • Ability to read, interpret, and create electrical schematics, wiring diagrams, panel layouts, technical drawings, and P&ID schematics.
  • Experience with National Instruments LabVIEW and/or mechatronics.
  • Experience with chemical delivery and fluid process flow control.
  • Ability to climb, stoop, kneel, crouch, reach, walk, push, pull, grasp, and lift up to 25 pounds.

Ultra Clean Technology Compensation & Benefits Highlights

The following summarizes recurring compensation and benefits themes identified from responses generated by popular LLMs to common candidate questions about Ultra Clean Technology and has not been reviewed or approved by Ultra Clean Technology.

  • Healthcare Strength — Plan choice includes Cigna and Kaiser options, with preventive care covered in-network and employer HSA/HRA support and wellness incentives. This breadth provides flexibility to align coverage with location and usage needs.
  • Retirement Support — A defined 401(k) program features matching contributions after an initial service period, auto-enrollment, and clear vesting milestones. These elements create predictable retirement savings support with straightforward participation.
  • Leave & Time Off Breadth — PTO accrual increases with tenure to a generous cap, complemented by a structured paid holiday schedule. This structure can support time away for rest and personal needs.

Ultra Clean Technology Insights

Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Bridgeton, NJ
2,611 Employees
Year Founded: 1991

What We Do

UltraClean Holdings, Inc. (UCT) is a global leader in semiconductor fabrication support. Our Products Division provides improved design-to-delivery times for major subassemblies, advanced flow control, and high-precision manufacturing. Our Services Division offers tool chamber parts cleaning and coating, and micro-contamination analysis. UCT also provides pivotal production support for the power & energy, and process industries.

Similar Jobs

Hilton Logo Hilton

Banquet Manager- Hilton Austin

Events • Food • Travel • Hospitality • Hotels & Resorts
In-Office
Austin, TX, USA
500000 Employees

Hilton Logo Hilton

Beverage Server- Hilton Americas Houston

Events • Food • Travel • Hospitality • Hotels & Resorts
In-Office
Houston, TX, USA
500000 Employees

Cloudflare Logo Cloudflare

Account Director

Cloud • Information Technology • Security • Software • Cybersecurity
Hybrid
4 Locations
4400 Employees
313K-449K Annually

Cloudflare Logo Cloudflare

Senior Systems Engineer

Cloud • Information Technology • Security • Software • Cybersecurity
Hybrid
4 Locations
4400 Employees
185K-254K Annually

Similar Companies Hiring

Fortune Brands Innovations Thumbnail
Manufacturing
Deerfield, IL
10000 Employees
Amalgamated Sugar Thumbnail
Food • Greentech • Agriculture • Industrial • Manufacturing
Boise, Idaho
768 Employees
Ford Energy Thumbnail
Automotive • Software • Energy • Utilities • Manufacturing • Renewable Energy
US

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account