Sr. Manufacturing Engineer, Blades and Vanes

Posted Yesterday
Be an Early Applicant
Bastrop, TX, USA
In-Office
Senior level
Aerospace • Other
The Role
Owns equipment installation, commissioning, supplier acceptance testing, and process development for investment casting blades and vanes. The engineer transitions into process ownership, managing cost, rate, yield, quality, equipment safety, documentation, troubleshooting, root-cause analysis, and technical projects. Responsibilities include coordinating facilities and MES integration, developing tools and process aids, collaborating cross-functionally, and mentoring engineers and technicians. Travel is approximately 15%, with extended hours and weekends during commissioning and production ramp.
Summary Generated by Built In

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

SR. MANUFACTURING ENGINEER, BLADES AND VANES

Working directly in the materials engineering group, this position owns equipment installation, commissioning, and process development for selected areas the blades and vanes investment casting line, from ceramic cores through wax, shell, and cast. A counterpart owns post-cast operations (shell removal through coating). Experience in any cores-through-cast area is welcome. The role starts with commissioning, then transitions to process ownership in the area where the engineer is strongest, always with a strong equipment foundation.

RESPONSIBILITIES:

  • Lead commissioning, Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), supplier management, and customization of pre-cast equipment, including VIM furnaces, ceramic and wax injection machines, shell dip lines, and thermal systems (kilns, dewax autoclaves, burnout and preheat furnaces).
  • Coordinate supplier-defined facilities and services: power, water, waste, controls, network, connectivity, and MES.
  • After commissioning, take process ownership of assigned cores-through-cast operations, drive production-ready capability, and own cost, rate, yield, and quality.
  • Specify, design, and implement tools, fixtures, process aids, and additional equipment to hit rate, quality, and yield targets.
  • Develop and maintain work instructions, process specifications, PFMEAs, control plans, and change-control documentation.
  • Own EHS and process safety for assigned equipment, including high-temperature, vacuum, pressure, and chemical operations.
  • Troubleshoot equipment and process issues on the floor; lead root-cause analysis and implement robust corrections.
  • Collaborate with Materials, Design, Quality, Facilities, Controls, Production, Maintenance/Reliability, and EHS, including technicians and operators.
  • Lead technical projects and mentor junior engineers and technicians; provide technical guidance and promote skill growth and team cohesion. Senior individual-contributor role, not a people-manager position.

BASIC QUALIFICATIONS:

  • Bachelor’s degree in mechanical, manufacturing, industrial, electrical, chemical, materials science, or other engineering discipline.
  • 5+ years of equipment, manufacturing, or process engineering, including hands-on installation, commissioning, FAT/SAT, and supplier management.

PREFERRED SKILLS AND EXPERIENCE: 

  • Experience in at least one major area of investment casting or a closely related high-temperature/precision process, and the ability to learn the full cores-through-cast flow.
  • Strong mechanical aptitude with working knowledge of electrical, controls, automation, and facilities. Able to support or transition into maintenance and reliability for assigned equipment.
  • Works independently, delivers under tight schedules, and communicates effectively with suppliers, technicians, and cross-functional partners.
  • Direct experience with VIM furnaces, ceramic/wax injection, kilns/ovens, autoclaves, dip lines, core leachers, HIP, heat treat, AGVs, or related process equipment.
  • Breadth across mechanical, electrical, materials, controls, and automation.
  • Experience integrating equipment with MES and plant networks.
  • Lean/Six Sigma or equivalent structured problem-solving.
  • Prior mentoring of engineers and technicians, or technical leadership of project teams.
  • Aerospace, energy, or other high-reliability casting or precision manufacturing.
  • Hands-on maintenance, reliability, or equipment-sustainment experience.

ADDITIONAL REQUIREMENTS: 

  • Travel approximately 15% for equipment commissioning and FATs; extended hours or weekends as required during commissioning and ramp.
  • Ability to lift up to 25Ibs unassisted.
  • Standing/walking for long periods of time.
  • Willingness to work long hours and weekends as necessary to accommodate manufacturing and test campaigns.

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected]. 

Skills Required

  • Bachelor's degree in mechanical, manufacturing, industrial, electrical, chemical, materials science, or another engineering discipline
  • 5+ years of equipment, manufacturing, or process engineering experience
  • Hands-on experience with equipment installation, commissioning, FAT/SAT, and supplier management
  • Ability to travel approximately 15% for equipment commissioning and FATs
  • Ability to lift up to 25 pounds unassisted
  • Ability and willingness to stand or walk for long periods and work extended hours or weekends as needed
  • U.S. citizenship or national, lawful permanent residency, refugee or asylee status, or eligibility to obtain required ITAR authorizations
  • Experience in investment casting or a related high-temperature or precision process
  • Working knowledge of electrical systems, controls, automation, and facilities
  • Experience with VIM furnaces, ceramic or wax injection, kilns, ovens, autoclaves, dip lines, core leachers, HIP, heat treat, AGVs, or related process equipment
  • Experience integrating equipment with MES and plant networks
  • Lean, Six Sigma, or equivalent structured problem-solving experience
  • Prior mentoring of engineers and technicians or technical leadership of project teams
  • Aerospace, energy, high-reliability casting, or precision manufacturing experience
  • Hands-on maintenance, reliability, or equipment-sustainment experience

SpaceX Compensation & Benefits Highlights

The following summarizes recurring compensation and benefits themes identified from responses generated by popular LLMs to common candidate questions about SpaceX and has not been reviewed or approved by SpaceX.

  • Equity Value & Accessibility — Equity grants are a core part of total compensation, with periodic company-run tender offers that create liquidity before any public listing. These mechanisms can make the equity component feel materially valuable in practice.
  • Healthcare Strength — The package includes comprehensive medical, dental, and vision coverage, with on-site clinics and health resources at major sites. This breadth of coverage is presented as a strong element of the offering.
  • Wellbeing & Lifestyle Benefits — Major locations feature on-site amenities such as fitness facilities, food/coffee, clinics, and other conveniences. These lifestyle perks enhance day-to-day value alongside cash and equity.

SpaceX Insights

Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Hawthorne, CA
8,879 Employees
Year Founded: 2002

What We Do

SpaceX designs, manufactures and launches the world’s most advanced rockets and spacecraft. The company was founded in 2002 by Elon Musk to revolutionize space transportation, with the ultimate goal of making life multiplanetary. SpaceX has gained worldwide attention for a series of historic milestones. It is the only private company ever to return a spacecraft from low-Earth orbit, which it first accomplished in December 2010. The company made history again in May 2012 when its Dragon spacecraft attached to the International Space Station, exchanged cargo payloads, and returned safely to Earth — a technically challenging feat previously accomplished only by governments. Since then Dragon has delivered cargo to and from the space station multiple times, providing regular cargo resupply missions for NASA.

Similar Jobs

Tapestry - Coach and Kate Spade Logo Tapestry - Coach and Kate Spade

Sales Associate II

eCommerce • Fashion • Retail • Sales • Wearables • Design
Hybrid
South Houston, TX, USA
16000 Employees
15-20 Hourly

Boeing Logo Boeing

Financial Analyst

Aerospace • Information Technology • Software • Cybersecurity • Design • Defense • Manufacturing
Hybrid
Irving, TX, USA
170000 Employees
97K-131K Annually

Boeing Logo Boeing

Associate Shipping/Receiving Specialist

Aerospace • Information Technology • Software • Cybersecurity • Design • Defense • Manufacturing
In-Office
Coppell, TX, USA
170000 Employees
42K-44K Annually

Enverus Logo Enverus

Utility 3D Modeling & Design Manager - 26460

Big Data • Information Technology • Software • Analytics • Energy
In-Office or Remote
5 Locations
1800 Employees
120K-140K Annually

Similar Companies Hiring

Outpost Space Thumbnail
Aerospace • Defense
Los Angeles, California
38 Employees
Cravath, Swaine & Moore LLP Thumbnail
Legal Tech • Other • Professional Services
New York, NY
1200 Employees
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account