SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
SR. EQUIPMENT ENGINEER, INJECTION MOLDING
SpaceX is developing a low-latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.
Working directly in the materials engineering group, this position is responsible for providing engineering support on planned and unplanned repairs, modifications, and upgrades of production equipment in the Injection Molding Starlink program. The equipment engineers are the primary technical resource for technicians and support for day-to-day resolution of the most challenging technical issues facing the team. They take end-to-end ownership of equipment improvement projects from concept through design and implementation and play a key part in maximizing critical production equipment availability, enabling Starlink to rapidly pursue its mission. The correct individual will bring an open mindset, challenge the status quo with regard to traditional vs. emerging technologies, and utilize a logical and disciplined approach to evaluate and select the correct set of solutions.
RESPONSIBILITIES:
- Demonstrate extreme ownership of projects through their entire lifecycle, from initial concept generation through fabrication and production bring-up, specifically focused on plastic injection molding and manufacturing processes.
- Lead technicians to troubleshoot and resolve technically complex Injection molding machines and peripheral equipment failures.
- Perform root cause analysis and action corrective measures to address equipment, process, and behavioral gaps.
- Develop and execute complex improvement projects to maximize production equipment availability, cycle time optimization and overall equipment effectiveness.
- Complete hands-on and in-depth troubleshooting and repairs of equipment: mechanical, electrical, automation, fluid, pneumatic, and control system failures.
- Coordinate internal and third-party resources to scope and execute repairs, overhauls, and equipment upgrade projects.
- Leverage feedback from technicians to drive improvements to work instructions and processes.
- Coordinate with internal equipment reliability engineering, tool engineering, and automation engineering teams to design and implement machine upgrades.
- Balance simultaneous projects of varying scope and complexity in a fast-paced environment.
- Create, modify, and update Injection Molding Machines preventative maintenance instructions to eliminate recurring failures or low-value tasks.
- Interface with engineering, quality, production, and procurement to resolve any hold factors blocking production.
- Solve complex, open-ended problems with an emphasis on speed of execution and efficiency.
- Publish and maintain detailed schedules for each development project segment.
BASIC QUALIFICATIONS:
- Bachelor’s degree in mechanical, manufacturing, materials engineering, or an engineering degree.
- 5+ years of experience with mechanical design of complex components and assemblies.
PREFERRED SKILLS AND EXPERIENCE:
- 5+ years of experience with plastic processing.
- 5+ years of experience with injection molding peripherals.
- Experience working in a high volume manufacturing environment.
- Experience with injection molding processing of Polycarbonate, Nylon, and Thermoplastic Elastomers (TPE).
- Experience with injection molding cooling systems.
- Experience with injection molding custom machine design including electromechanical systems, end-of-arm tooling, motors, actuators, linear rails, bearings, lifting/rigging, etc.
- Experience with material requirements planning, enterprise resource planning, and computerized maintenance management systems.
- Experience designing mechanical systems using 3D CAD software and 2D drawings.
- Experience designing and implement an End of Arm Tool.
- Experience applying common manufacturing and machining processes where it applies to design such as welding, machining, assembly, inspection, etc.
- Experience sizing basic mechanical components and structures.
- Solid understanding of drafting standards and demonstrated experience in applying geometric dimensioning and tolerancing.
- Solid understanding of common manufacturing processes and hands-on machining experience including mills, lathes, manual, and computer numerical control (CNC).
ADDITIONAL REQUIREMENTS:
- Must be available to work extended hours and weekends as needed.
- Willingness and ability to travel up to 25% time.
- Work performed in an environment requiring exposure to fumes, odors, and noise.
- Comfort occasionally working in tight or confined spaces.
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected].
Skills Required
- Bachelor's degree in mechanical, manufacturing, materials engineering, or another engineering discipline
- 5+ years of experience with mechanical design of complex components and assemblies
- 5+ years of experience with plastic processing
- 5+ years of experience with injection molding peripherals
- Experience in a high-volume manufacturing environment
- Experience with injection molding Polycarbonate, Nylon, and Thermoplastic Elastomers
- Experience with injection molding cooling systems
- Experience with custom injection molding machine design and electromechanical systems
- Experience with material requirements planning, enterprise resource planning, and computerized maintenance management systems
- Experience designing mechanical systems using 3D CAD software and 2D drawings
- Experience designing and implementing end-of-arm tooling
- Experience with welding, machining, assembly, and inspection processes
- Experience sizing basic mechanical components and structures
- Understanding of drafting standards and geometric dimensioning and tolerancing
- Hands-on machining experience with mills, lathes, manual equipment, and CNC equipment
- Availability to work extended hours and weekends as needed
- Willingness and ability to travel up to 25% of the time
- Ability to work around fumes, odors, and noise and occasionally in confined spaces
- Must meet ITAR eligibility requirements
SpaceX Compensation & Benefits Highlights
The following summarizes recurring compensation and benefits themes identified from responses generated by popular LLMs to common candidate questions about SpaceX and has not been reviewed or approved by SpaceX.
-
Equity Value & Accessibility — Equity grants are a core part of total compensation, with periodic company-run tender offers that create liquidity before any public listing. These mechanisms can make the equity component feel materially valuable in practice.
-
Healthcare Strength — The package includes comprehensive medical, dental, and vision coverage, with on-site clinics and health resources at major sites. This breadth of coverage is presented as a strong element of the offering.
-
Wellbeing & Lifestyle Benefits — Major locations feature on-site amenities such as fitness facilities, food/coffee, clinics, and other conveniences. These lifestyle perks enhance day-to-day value alongside cash and equity.
SpaceX Insights
What We Do
SpaceX designs, manufactures and launches the world’s most advanced rockets and spacecraft. The company was founded in 2002 by Elon Musk to revolutionize space transportation, with the ultimate goal of making life multiplanetary. SpaceX has gained worldwide attention for a series of historic milestones. It is the only private company ever to return a spacecraft from low-Earth orbit, which it first accomplished in December 2010. The company made history again in May 2012 when its Dragon spacecraft attached to the International Space Station, exchanged cargo payloads, and returned safely to Earth — a technically challenging feat previously accomplished only by governments. Since then Dragon has delivered cargo to and from the space station multiple times, providing regular cargo resupply missions for NASA.








