Sr. Electrical Engineer, Hardware Reliability (Starlink)

Posted 4 Hours Ago
Be an Early Applicant
Bastrop, TX, USA
In-Office
Senior level
Aerospace • Other
The Role
Lead electrical hardware failure analysis, PCBA reliability, production-yield improvement, and qualification testing for Starlink hardware. Debug phased-array antennas, Wi-Fi routers, and power supply PCBAs using advanced diagnostic tools; identify root causes, corrective actions, and process improvements. Develop diagnostic capabilities, document failure modes, prevent defective hardware escapes, and collaborate with design, software, test, manufacturing, production, and supply chain teams. The role is fully onsite in Bastrop, Texas and requires up to 30% travel.
Summary Generated by Built In

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

SR. ELECTRICAL ENGINEER, HARDWARE RELIABILITY (STARLINK) 

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe. 

As a Sr. Electrical Engineer on the Starlink team, you will be responsible for electrical hardware failure analysis, PCBA reliability, and quality of the PCBA production process. This is a high-visibility, hands-on role and engineers on this team are responsible for solving systemic production issues, running root cause of failures from end to end, and working to drive process changes for continually improving product quality. Engineers in this role are expected to become intimately familiar with the circuits, manufacturing processes, and test procedures for the designs they support. 

RESPONSIBILITIES: 

  • Own qualification and test of new electrical designs and SMT manufacturing lines for high volume production
  • Perform hands-on debugging to drive to root cause and corrective action of failed phased-array antenna, Wi-Fi router, and power supply PCBAs 
  • Utilize advanced diagnostic tools such as oscilloscopes, spectrum analyzers, x-ray machines, logic analyzers, and custom firmware scripts to root cause electronics 
  • Develop tools and identify equipment to enhance the team’s capabilities in swiftly root causing electronics 
  • Drive root cause of PCBA production yield issues and prevent factory escapes of defective hardware 
  • Document failure modes and use data to continually improve reliability 
  • Partner with design, software, test, and manufacturing engineering teams to improve yield, processes, test coverage, quality, and reliability 

BASIC QUALIFICATIONS: 

  • Bachelor’s degree in an electrical engineering or related engineering discipline
  • 5+ years of experience working with digital or mixed-signal designs, using oscilloscopes, digital multimeters, power supplies, and/or soldering equipment 

PREFERRED SKILLS AND EXPERIENCE: 

  • Master’s degree in an electrical engineering or related discipline
  • 6+ years experience in consumer electronics or similar industry 
  • Experience troubleshooting electronics hardware and/or RF communication systems 
  • Excellent verbal and written communication skills 
  • Demonstrated capability to jump into ill-defined problems and drive positive outcomes 
  • Familiarity with programming and automation/scripting languages or ability to quickly learn them (i.e. Python, C++, SQL) 
  • Experience with PCBA manufacturing processes and assembly such as SMT reflow, wave solder, and selective solder 
  • Experience with PCBA environmental testing and reliability calculators 
  • Proficiency in understanding PCB schematics and layout tools 
  • Experience with Wi-Fi standards (802.11ax, 802.11ac, 802.11n) 
  • Experience with engineering projects in any one or more of the following areas: CPU/FPGA/ASIC circuit boards, Linux, high-speed interfaces, memories, and/or low-power platforms 
  • Experience with Mentor Graphics Xpedition 
  • Experience presenting findings to engineering, production, and supply chain teams on a regular basis to drive corrective action 
  • Experience in a fast-paced, iterative design environment within the consumer electronics, mobile handset, medical devices, aerospace, marine or automotive industries 
  • Self-starter attitude, energy, and the ability to communicate effectively across business and technical discipline 

ADDITIONAL REQUIREMENTS: 

  • Must be willing to work long hours and weekends as needed for critical projects
  • Must be willing to travel up to 30% for work
  • Must be willing to work 100% onsite in Bastrop, TX (Austin area) - remote or hybrid work not considered

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected]. 

Skills Required

  • Bachelor’s degree in electrical engineering or a related engineering discipline
  • At least 5 years of experience working with digital or mixed-signal designs
  • Experience using oscilloscopes, digital multimeters, power supplies, and/or soldering equipment
  • Master’s degree in electrical engineering or a related discipline
  • At least 6 years of experience in consumer electronics or a similar industry
  • Experience troubleshooting electronics hardware and/or RF communication systems
  • Programming or automation/scripting experience with Python, C++, SQL, or similar languages
  • Experience with PCBA manufacturing and SMT, wave solder, or selective solder processes
  • Experience with PCBA environmental testing and reliability calculators
  • Proficiency with PCB schematics and layout tools
  • Experience with Wi-Fi 802.11ax, 802.11ac, or 802.11n standards
  • Experience with CPU, FPGA, ASIC circuit boards, Linux, high-speed interfaces, memories, or low-power platforms
  • Experience with Mentor Graphics Xpedition
  • Willingness to work long hours and weekends as needed for critical projects
  • Willingness to travel up to 30% for work
  • Willingness to work 100% onsite in Bastrop, Texas
  • Must meet applicable ITAR eligibility requirements or obtain required U.S. Department of State authorizations

SpaceX Compensation & Benefits Highlights

The following summarizes recurring compensation and benefits themes identified from responses generated by popular LLMs to common candidate questions about SpaceX and has not been reviewed or approved by SpaceX.

  • Equity Value & Accessibility — Equity grants are a core part of total compensation, with periodic company-run tender offers that create liquidity before any public listing. These mechanisms can make the equity component feel materially valuable in practice.
  • Healthcare Strength — The package includes comprehensive medical, dental, and vision coverage, with on-site clinics and health resources at major sites. This breadth of coverage is presented as a strong element of the offering.
  • Wellbeing & Lifestyle Benefits — Major locations feature on-site amenities such as fitness facilities, food/coffee, clinics, and other conveniences. These lifestyle perks enhance day-to-day value alongside cash and equity.

SpaceX Insights

Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Hawthorne, CA
8,879 Employees
Year Founded: 2002

What We Do

SpaceX designs, manufactures and launches the world’s most advanced rockets and spacecraft. The company was founded in 2002 by Elon Musk to revolutionize space transportation, with the ultimate goal of making life multiplanetary. SpaceX has gained worldwide attention for a series of historic milestones. It is the only private company ever to return a spacecraft from low-Earth orbit, which it first accomplished in December 2010. The company made history again in May 2012 when its Dragon spacecraft attached to the International Space Station, exchanged cargo payloads, and returned safely to Earth — a technically challenging feat previously accomplished only by governments. Since then Dragon has delivered cargo to and from the space station multiple times, providing regular cargo resupply missions for NASA.

Similar Jobs

Micron Technology Logo Micron Technology

Design Engineer

Artificial Intelligence • Hardware • Information Technology • Machine Learning
In-Office
Richardson, TX, USA
45000 Employees

Micron Technology Logo Micron Technology

Design Engineer

Artificial Intelligence • Hardware • Information Technology • Machine Learning
In-Office
Richardson, TX, USA
45000 Employees

CoreWeave Logo CoreWeave

Manager, Treasury Accounting

Cloud • Information Technology • Machine Learning
In-Office
6 Locations
1450 Employees
115K-168K Annually

Capco Logo Capco

Quality Assurance Analyst

Fintech • Professional Services • Consulting • Energy • Financial Services • Cybersecurity • Generative AI
Hybrid
Dallas, TX, USA
6000 Employees

Similar Companies Hiring

Outpost Space Thumbnail
Aerospace • Defense
Los Angeles, California
38 Employees
Cravath, Swaine & Moore LLP Thumbnail
Legal Tech • Other • Professional Services
New York, NY
1200 Employees
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account