Senior R&D Engineer, Electrical & FPGA Design

Posted 5 Days Ago
Be an Early Applicant
San Diego, CA, USA
In-Office
140K-180K Annually
Senior level
Software • Biotech
The Role
Own electrical architecture and low-power FPGA/HDL design for implantable medical electronics, including supervisory safety logic, high-speed sensor communications, inductive charging, RF telemetry, PCB/flex design, and verification. Lead design controls, fault-tolerant safety mechanisms, timing closure, FPGA emulation, EMC testing, failure analysis, and production transfer while collaborating across firmware, silicon, mechanical, systems, and manufacturing teams.
Summary Generated by Built In

TITLE

Sr. R&D Engineer, Electrical & FPGA Design

DATE

October 2026

WORK LOCATION

In-Office 5x/week in San Diego

BASE SALARY RANGE

$140,000 - $180,000/year



About the Role

We are seeking a Senior R&D Electrical Engineer to own the electrical and programmable-logic design of Synchron's next-generation implantable electronics, from concept through design verification. The core of the role is defining and developing the HDL for the implant's low-power FPGA: supervisory logic for device health, status, and control, and the implant side of a high-speed serial link to distributed sensing electronics, defined from interface specifications with external silicon partners and proven in FPGA emulation ahead of hardware. The role also owns the surrounding electrical architecture - custom silicon integration, inductive charging and RF telemetry, and PCB/flex design - and carries a safety mandate: detectable faults, redundant monitoring, and defined safe states within a medical device design-controls framework.

Firmware is owned by a dedicated engineer; this role reviews, debugs, or contributes to firmware and test software as the program needs. This is a hands-on, technically deep role: equally comfortable reviewing RTL and schematics as defining system-level architecture.

Key Responsibilities

FPGA / HDL Design

  • Architect and develop synthesizable HDL (VHDL or SystemVerilog) for a low-power FPGA serving as the implant's health, status, control, and communications controller; select the FPGA family and configuration approach against power, size, I/O, and configuration-integrity constraints
  • Implement supervisory functions: power sequencing, voltage/current/temperature monitoring, watchdogs, fault detection and latching, status reporting to the host MCU, and transition to defined safe states
  • Own timing closure, clock-domain crossing, and low-power clocking; develop self-checking testbenches and simulation regressions appropriate to safety-relevant logic
  • Define and verify the FPGA/MCU interface (SPI, register map); own FPGA bring-up, diagnostics, and configuration/update strategy

High-Speed Sensor Communications Link

  • Define and implement the implant side of the serial link to distributed sensing electronics: clock generation and distribution, line driver/receiver scheme (including emulated-LVDS I/O), framing, synchronization, error detection, and recovery
  • Derive and maintain link and timing budgets (jitter, skew, channel loss) and reconcile them with partner models
  • Build bench models and FPGA emulation of the link, integrating partner-supplied RTL, to retire risk before final hardware

Safety & Redundant Systems

  • Design control and monitoring logic so single faults are detected and contained: redundant or diverse monitors, FPGA/MCU cross-checks, independent shutdown paths, and fail-safe defaults on loss of clock, power, or communication
  • Define safe-state behavior and entry/exit conditions; perform FMEA / fault-tree analysis and trace risk controls to design inputs and verification per ISO 14971
  • Apply configuration-integrity and single-event-upset mitigations (CRC, readback, redundancy) for chronically implanted programmable logic

Electrical Architecture, Power & RF

  • Own the implant's electrical architecture and lead schematic design, component selection, and simulation for ultra-low-power implantable electronics
  • Design and characterize the inductive charging link: receive coil geometry and placement, resonant tuning, rectification and regulation, alignment and load tolerance, and tissue heating limits
  • Optimize the wireless telemetry link (custom RF, BLE, or inductive) under tissue constraints, including antenna selection, matching, and integration within the hermetic enclosure and header
  • Establish power budgets and duty-cycling strategies that balance data throughput against implant longevity

PCB/Flex, Verification & Design Controls

  • Lead design of miniaturized, high-density PCB and flex-rigid assemblies in Altium Designer, including layout review, signal integrity, and DFM at implant scale
  • Define and execute electrical and FPGA verification plans; lead bench, environmental, and EMC/EMI testing; own failure analysis and design-for-reliability practices
  • Serve as electrical and programmable-logic lead within design controls (IEC 60601-1, IEC 62304, ISO 14708); author design inputs, risk analyses, and V&V protocols with traceability from requirements to RTL and test; support regulatory submissions

Collaboration

  • Partner with firmware, silicon, mechanical, and systems engineers to co-optimize the implant; review firmware and test-software changes touching the electrical and FPGA interfaces and step in on cross-domain debug
  • Work with contract manufacturers and test houses to transfer designs into production

Required Qualifications

  • Bachelor's degree in electrical engineering, computer engineering, or a related discipline
  • 8+ years in mixed-signal hardware design for miniaturized, high-reliability electronic systems
  • 5+ years of hands-on FPGA development: synthesizable VHDL or SystemVerilog, clock-domain crossing and timing closure, and simulation-based verification, on low-power FPGA families
  • Working knowledge of serial interface design: source-synchronous or CDR schemes, LVDS/CML signaling, framing and error detection, SPI/I2C, and register-map design
  • Demonstrated design of safety-relevant or fault-tolerant digital systems: watchdogs, redundant monitors, fail-safe defaults, fault detection and isolation
  • Hands-on experience with inductive power transfer or near-field wireless charging, or equivalent resonant/magnetics design
  • Strong high-density PCB and flex-circuit design experience with proficiency in Altium Designer; SPICE-class simulation and signal-integrity analysis
  • Ability to read, debug, and review embedded C firmware and test software, and contribute when needed
  • Experience bringing electronic subsystems from prototype through design verification into production

Preferred Qualifications

  • Active implantable medical device experience (e.g., neurostimulators, cochlear implants, cardiac rhythm devices)
  • Custom silicon integration or co-design, including specification development, emulation of partner RTL on FPGA, and bring-up
  • Functional-safety or high-integrity design standards (IEC 60601-1 PEMS, IEC 62304, IEC 61508 / ISO 26262 concepts, DO-254-style assurance)
  • Antenna or RF front-end design for implantable or body-worn devices, including EM simulation (HFSS, CST, or COMSOL)
  • Coil design and EM/thermal modeling for inductive links, including MRI-compatibility constraints on magnetic materials
  • Low-noise neural or bioelectric front-end design; embedded firmware development on wireless SoCs with an RTOS and BLE
  • Familiarity with ISO 14708, IEC 60601, and FDA guidance for implantable electronics; experience supporting IDE, PMA, or 510(k) submissions

Skills Required

  • Bachelor’s degree in electrical engineering, computer engineering, or a related discipline
  • 8+ years of experience in mixed-signal hardware design for miniaturized, high-reliability electronic systems
  • 5+ years of hands-on FPGA development using synthesizable VHDL or SystemVerilog, clock-domain crossing, timing closure, and simulation-based verification
  • Working knowledge of serial interface design, including source-synchronous or CDR schemes, LVDS/CML signaling, framing, error detection, SPI/I2C, and register-map design
  • Experience designing safety-relevant or fault-tolerant digital systems with watchdogs, redundant monitors, fail-safe defaults, and fault detection and isolation
  • Hands-on experience with inductive power transfer, near-field wireless charging, or equivalent resonant/magnetics design
  • Strong high-density PCB and flex-circuit design experience with Altium Designer, SPICE-class simulation, and signal-integrity analysis
  • Ability to read, debug, and review embedded C firmware and test software
  • Experience bringing electronic subsystems from prototype through design verification into production
  • Experience with active implantable medical devices, such as neurostimulators, cochlear implants, or cardiac rhythm devices
  • Custom silicon integration or co-design, including partner RTL emulation on FPGA and bring-up
  • Experience with functional-safety or high-integrity design standards, including IEC 60601-1, IEC 62304, IEC 61508, ISO 26262, or DO-254
  • Antenna or RF front-end design for implantable or body-worn devices, including EM simulation with HFSS, CST, or COMSOL
  • Coil design and electromagnetic/thermal modeling for inductive links, including MRI-compatibility constraints
  • Low-noise neural or bioelectric front-end design
  • Embedded firmware development on wireless SoCs using an RTOS and BLE
  • Familiarity with ISO 14708, IEC 60601, FDA guidance, and IDE, PMA, or 510(k) submissions
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
HQ: Washington, DC
181 Employees
Year Founded: 2016

What We Do

Synchron is a leading implantable brain computer interface company. The stentrode is the first commercial implantable brain computer interface to receive an FDA IDE for in human clinical trials.

Similar Jobs

Uniphore Logo Uniphore

VP of AI Engineering

Artificial Intelligence • Machine Learning
In-Office
Palo Alto, CA, USA
465 Employees
286K-358K Annually

Hilton Logo Hilton

Room Attendant (Part-Time) - Waldorf Astoria Monarch Beach Resort and Club

Events • Food • Travel • Hospitality • Hotels & Resorts
In-Office
Dana Point, CA, USA
500000 Employees
24-40 Hourly

Hilton Logo Hilton

Barback, AJI Bar and Lounge - Signia by Hilton San Jose

Events • Food • Travel • Hospitality • Hotels & Resorts
In-Office
San Jose, CA, USA
500000 Employees

Hilton Logo Hilton

Housekeeping Houseperson - Waldorf Astoria Monarch Beach Resort and Club

Events • Food • Travel • Hospitality • Hotels & Resorts
In-Office
Dana Point, CA, USA
500000 Employees
24-40 Hourly

Similar Companies Hiring

Ford Energy Thumbnail
Automotive • Software • Energy • Utilities • Manufacturing • Renewable Energy
US
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees
Blee Thumbnail
Artificial Intelligence • Marketing Tech • Software
New York, New York
33 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account