Senior Magnetics Engineer, Electro-Permanent Magnets

Posted 23 Days Ago
Be an Early Applicant
8 Locations
In-Office or Remote
160K-200K Annually
Senior level
Aerospace • Hardware
Our mission is to make life galactic through exponential growth.
The Role
Own electro-permanent magnet devices from magnetic-circuit architecture through waveform requirements, mechanical integration, characterization, and life testing. Translate machine loads into magnetic, electrical, thermal, and lifetime requirements; design circuits, coils, sensors, and interfaces; model performance using analytical and finite-element methods; build measurement fixtures; conduct environmental and lifecycle testing; diagnose failures; and release manufacturable designs with specifications, supplier controls, assembly procedures, and acceptance tests.
Summary Generated by Built In
The Mission

GRAM is a self replication company creating populations of insectoids for the physical economy.

Our first research frontier is self-preservation: the base case of physical self-replication. Our machines will survive, coordinate, and recover without humans. We believe scalable machine labor requires more than single-agent task generality or machines shaped in our image.

About the role

You will own GRAM's electro-permanent magnet device from magnetic-circuit architecture through pulse-waveform requirements, mechanical integration, characterization, and life testing. You will make holding force and release behavior predictable across air gaps, surface condition, geometry, temperature, switching history, and manufacturing variation.

You will define magnetic requirements, device performance, interface constraints, and acceptance limits, then prove them through measured, manufacturable hardware with known energy use, thermal limits, degradation, and failure behavior.

What you will do
  • Translate machine load cases into EPM holding-force, shear, air-gap, switching-time, energy, thermal, residual-flux, mass, and lifetime requirements.
  • Design magnetic circuits, pole pieces, permanent-magnet arrangements, switching coils, flux returns, sensors, mechanical interfaces, and drive-electronics requirements.
  • Use analytical reluctance models and finite-element analysis to predict flux density, saturation, leakage, force, demagnetization risk, eddy-current effects, and temperature sensitivity.
  • Build fixtures that measure normal and shear force, flux, current and voltage waveforms, switching repeatability, release behavior, and performance across representative materials and gaps.
  • Run cycling, shock, vibration, thermal, contamination, and off-nominal tests; isolate magnetic, electrical, mechanical, and interface failure modes.
  • Release EPM designs through drawings, material specifications, magnetization controls, supplier qualification, assembly procedures, and acceptance tests.
Minimum qualifications
  • Bachelor’s degree in electrical, mechanical, aerospace, applied physics, or a related field, or equivalent practical experience.
  • Designed, built, and characterized a permanent-magnet circuit, magnetic latch, electromagnetic actuator, motor magnetic circuit, or comparable nonlinear magnetic device.
  • Built a nonlinear magnetic model in Ansys Maxwell, COMSOL, JMAG, FEMM, or equivalent using measured or supplier B-H data, and compared predicted flux or force against hardware measurements.
  • Hands-on experience with gaussmeters or Hall probes, oscilloscopes, current probes, programmable power equipment, load cells, and automated acquisition in Python or MATLAB.
  • Delivered measured force, flux, switching, thermal, or lifecycle results and used the discrepancy between model and test to close a hardware failure or revise a released design.
Preferred experience
  • Electro-permanent magnets, switchable permanent magnets, magnetic latching, low-coercivity alloys, or magnetization processes.
  • Pulsed-power electronics, coil design, magnetic sensing, contact mechanics, or precision force-test fixtures.
  • Magnetic component sourcing, material traceability, environmental qualification, or production acceptance testing.

The annual base salary range for this San Francisco Bay Area position is $160,000–$200,000. Health coverage, benefits, and generous equity come with the role. This role is on-site in the San Francisco Bay Area. A relocation bonus is available. We hire to start as soon as possible. We review what you’ve shipped; if it’s the caliber we seek, interviews take about a week, start to finish. We treat your work and conversations with discretion.

Skills Required

  • Bachelor’s degree in electrical, mechanical, aerospace, applied physics, or a related field, or equivalent practical experience.
  • Experience designing, building, and characterizing a permanent-magnet circuit, magnetic latch, electromagnetic actuator, motor magnetic circuit, or comparable nonlinear magnetic device.
  • Experience building a nonlinear magnetic model in Ansys Maxwell, COMSOL, JMAG, FEMM, or equivalent using measured or supplier B-H data and comparing predictions with hardware measurements.
  • Hands-on experience with gaussmeters or Hall probes, oscilloscopes, current probes, programmable power equipment, load cells, and automated acquisition in Python or MATLAB.
  • Experience delivering measured force, flux, switching, thermal, or lifecycle results and using model-test discrepancies to resolve failures or revise released designs.
  • Experience with electro-permanent magnets, switchable permanent magnets, magnetic latching, low-coercivity alloys, or magnetization processes.
  • Experience with pulsed-power electronics, coil design, magnetic sensing, contact mechanics, or precision force-test fixtures.
  • Experience with magnetic component sourcing, material traceability, environmental qualification, or production acceptance testing.
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
4 Employees
Year Founded: 2025

What We Do

Humanity's birthright is to become galactic. GRAM is founded to serve this mission. We are a foundational AI and robotics startup birthing the machines and intelligence necessary to solve the physical labor bottleneck preventing space industrialization. Our first product is a general-purpose insectoid designed for work in vast swarms for operation in extreme environments. Over the coming century, our systems will build the critical infrastructure needed for humanity's expansion across the Milky Way.

Similar Jobs

VelocityEHS Logo VelocityEHS

Account Manager

Cloud • Greentech • Social Impact • Software • Consulting
Remote
2 Locations
500 Employees
74K-111K Annually

MongoDB Logo MongoDB

Technical Program Manager

Big Data • Cloud • Software • Database
Easy Apply
Remote or Hybrid
3 Locations
5550 Employees
155K-215K Annually

Dropbox Logo Dropbox

Senior Oracle Functional Lead - Record to Report

Artificial Intelligence • Cloud • Consumer Web • Productivity • Software • App development • Data Privacy
Remote
Canada
2500 Employees
134K-182K Annually

Optum Logo Optum

Associate Tech Support Analyst

Artificial Intelligence • Big Data • Healthtech • Information Technology • Machine Learning • Software • Analytics
Remote
Canada
160000 Employees
25-52 Hourly

Similar Companies Hiring

Outpost Space Thumbnail
Aerospace • Defense
Los Angeles, California
38 Employees
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees
Unusual Machines, Inc. Thumbnail
Hardware • Robotics
Orlando, FL
300 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account