The Role
Lead new product introduction from prototype through pilot production and mass-production handover. Coordinate cross-functional project plans, engineering changes, manufacturing readiness, pilot builds, tooling, fixtures, testing, and production documentation. Review BOMs, drawings, and specifications; drive process improvements, risk mitigation, root-cause analysis, corrective actions, and quality documentation including PFMEA, control plans, work instructions, and PPAP. Ensure production readiness and complete, controlled handover to manufacturing.
Summary Generated by Built In
About Vecmocon
Vecmocon is an IIT Delhi-incubated deep-tech EV startup focused on making the electric vehicle ecosystem smarter, connected, and more reliable through state-of-the-art technology solutions and a data-centric approach.
We are a young and fast-growing organization with a futuristic vision, ambitious goals, capable and empathetic leadership, and a collaborative work culture.
Website: www.vecmocon.com
1. Role PurposeThe NPI Quality Lead / Sr. NPI Quality Engineer will be responsible for ensuring product quality, process readiness, and manufacturing quality readiness throughout the New Product Introduction lifecycle, from product development and prototype builds through pilot production and Start of Production (SOP).
The role will act as the key quality interface between Technology, Hardware, Software, Mechanical, Production, NPI, Supplier Quality Assurance (SQA), Sourcing, Engineering, and EMS partners.
The position will ensure that product, process, supplier, testing, and manufacturing-related quality gaps are systematically identified, tracked, and closed before SOP.
The role will also support the SQA team in PPAP readiness, supplier audits, process validation, and closure of supplier-related quality observations.
2. Key ResponsibilitiesA. NPI Quality Planning & Coordination- Act as the Quality SPOC for assigned New Product Introduction projects.
- Coordinate with Technology, Hardware, Software, Mechanical, Production, NPI, SQA, Sourcing, Engineering, and EMS partners throughout the product development lifecycle.
- Participate in NPI reviews across Prototype, EVT, DVT, PVT, Pilot Production, and SOP, or equivalent development stages.
- Establish, implement, and track NPI Quality Gates.
- Ensure all required quality deliverables are completed before progressing to the next NPI stage.
- Review product and process risks and ensure appropriate preventive controls are defined before production release.
- Ensure quality concerns identified during development and pilot builds are properly documented, tracked, assigned, and closed with objective evidence.
- Drive production line readiness before pilot builds and SOP.
- Verify the availability, implementation, and effectiveness of:
- Process Flow
- Work Instructions
- Control Plan
- PFMEA
- Inspection Standards
- Testing and Validation Requirements
- Process Parameters
- Quality Checkpoints
- Traceability Requirements
- Error-Proofing / Poka-Yoke
- Special Process Controls, wherever applicable
- Ensure manufacturing and process controls are standardized across EMS locations.
- Conduct and support NPI Line Readiness Audits / Assessments and track observations to closure.
- Verify readiness of inspection equipment, test equipment, fixtures, gauges, and test stations.
- Ensure FCT, functional checks, and End-of-Line quality controls are defined, validated, and implemented before SOP.
- Identify potential production and quality risks before mass production and drive preventive actions.
- Maintain an NPI Observation / Action Tracker covering product, process, documentation, testing, and manufacturing readiness gaps.
- Coordinate with responsible stakeholders for timely closure of open observations.
- Drive Root Cause Analysis (RCA) and corrective actions for issues identified during prototype, pilot, and pre-SOP builds.
- Verify the effectiveness of corrective actions through subsequent builds, audits, validation results, or documented evidence.
- Escalate critical or overdue observations that may impact SOP readiness.
- Ensure no critical quality or process observation remains open without an approved disposition before SOP.
- Coordinate with EMS partners during NPI builds and ensure compliance with defined quality requirements.
- Conduct and support EMS NPI Readiness Reviews and Process Audits.
- Ensure manufacturing processes are aligned with approved product and process documentation.
- Monitor pilot-build quality performance, including:
- First Pass Yield (FPY)
- Rejection
- Rework
- Process Deviations
- Defect Trends
- Drive standardization of quality controls across different EMS manufacturing locations.
- Support EMS teams in identifying process risks and implementing effective preventive controls.
- Ensure all NPI-related deviations, concessions, and engineering/process changes are formally documented, reviewed, and approved.
- Support the SQA team in PPAP planning, review, submission, and closure.
- Review supplier PPAP documentation for completeness and alignment with project and quality requirements.
- Support supplier and process audits during new product development.
- Participate in:
- Supplier Process Audits
- Run-at-Rate / Capacity Assessments
- Process Validation
- First-Off / Trial Validation
- Dimensional Validation
- Functional Validation
- Special Characteristic Reviews
- Support closure of supplier-related PPAP and audit observations.
- Ensure supplier process readiness before component approval and release for SOP.
- Coordinate with SQA and suppliers for timely submission and closure of required quality documentation.
Ensure appropriate NPI quality documentation is prepared, reviewed, approved, implemented, and controlled, including:
- Quality Gate Checklist
- NPI Quality Plan
- PFMEA
- Control Plan
- Process Flow
- Inspection Standards
- Work Instructions
- Process Audit Checklists
- Line Readiness Checklist
- PPAP Documentation
- Validation / Test Reports
- Measurement System Analysis (MSA), where applicable
- Traceability Requirements
- Change / Deviation Records
- NPI Observation and Action Trackers
Ensure documentation and processes are aligned with IATF 16949, applicable customer-specific requirements, and internal Quality Management System (QMS) procedures.
4. Required Experience & Technical Competencies- 5–8 years of experience in NPI Quality, Manufacturing Quality, Supplier Quality, Automotive Electronics Quality, or related functions.
- Experience in Automotive, EV, BMS, EV Chargers, Automotive Electronics, PCB/PCBA, or Electronic Products will be preferred.
- Strong understanding of:
- APQP
- PPAP
- PFMEA
- Control Plan
- Process Flow
- MSA
- SPC
- 8D
- RCA / CAPA
- Process Audits
- Quality Gates
- NPI / Pilot Builds
- Working knowledge of IATF 16949 and Automotive Core Quality Tools.
- Experience working with EMS / Contract Manufacturing partners is highly desirable.
- Ability to understand electrical and electronic manufacturing processes and functional testing requirements.
- Good understanding of production line controls, inspection methodology, process capability, and manufacturing quality systems.
- Experience in cross-functional issue resolution, action tracking, and closure.
- Strong cross-functional coordination and stakeholder management skills.
- Ability to drive actions and closure without direct reporting authority.
- Strong analytical and structured problem-solving skills.
- Data-driven approach to quality decision-making.
- Good communication and presentation skills.
- Strong follow-up and closure orientation.
- Ability to proactively identify product, supplier, and manufacturing quality risks.
- Comfortable working in a fast-paced NPI and startup environment.
- Ability to constructively challenge gaps and ensure adherence to defined quality standards.
The role will be measured on:
- NPI Quality Gate Closure %
- Line Readiness Before Pilot / SOP
- NPI Observation Closure Within Target Timelines
- Critical Observations Open at SOP
- Pilot Build FPY / Rejection Rate
- NPI-Related Rework / Defect Rate
- Process Standardization Compliance
- EMS NPI Audit Score and Observation Closure
- PPAP Submission and Closure Timeliness
- Recurring Issue Rate from NPI to SOP / Post-SOP
- SOP Readiness Compliance
- Effectiveness of Corrective Actions
- Bachelor’s Degree / Diploma in Mechanical, Electrical, Electronics, Automobile, or a related Engineering discipline.
- Additional certification or qualification in Quality Management, IATF 16949, APQP/PPAP, Six Sigma, or related quality systems will be an advantage.
Skills Required
- NPI project ownership from prototype build through pilot production and mass-production handover
- Cross-functional team management and project planning
- Production readiness and manufacturing process development
- Experience coordinating SMT, THT, wave soldering, PCB assembly, mechanical assembly, programming, FCT, PDI, and final inspection
- BOM, drawing, specification, part number, revision, and engineering change review
- Tooling, fixture, jig, tester, and production equipment readiness
- Quality and process documentation, including PFD, PFMEA, control plans, work instructions, SOPs, inspection standards, packaging standards, and PPAP
- Root-cause analysis, 8D, CAPA, and corrective/preventive action experience
- Supplier management and customer coordination
- Risk management, data analysis, decision-making, communication, and follow-up
Am I A Good Fit?
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.
Success! Refresh the page to see how your skills align with this role.
The Company
What We Do
About Us : Vecmocon Technologies is a DeepTech startup working in sustainable and clean mobility. Founded by IIT Kanpur, IIT Delhi and ISB alumni Vecmocon is building ecosystem to strengthen electric mobility & clean energy revolution.
