The Role
Installs, commissions, maintains, troubleshoots, and repairs industrial X-ray inspection systems, high-voltage generators, vacuum systems, and LINAC equipment. Performs calibration, testing, radiation surveys, safety verification, root-cause analysis, customer training, remote support, and technical documentation. The role requires extensive domestic and international travel, customer interaction, compliance with electrical and radiation regulations, and collaboration with multidisciplinary engineering teams.
Summary Generated by Built In
High Voltage Electrical Engineer
Responsible for the installation, maintenance, troubleshooting, and repair of advanced industrial x-ray systems. This role involves both in-house system testing and field service at customer facilities worldwide. You will serve as the primary technical contact for customers and ensure high levels of customer satisfaction.
Job Description:
- Ensure all work is completed in compliance with all applicable local, state, federal electrical and radiation safety standards.
- Interact with a cross-disciplinary engineering team (mechanical, electrical, software, imaging) on system designs and to help resolve customer problems and provide world class customer service.
- Extensive travel to customer sites or other company locations worldwide (50% +/-)
Installation & Commissioning
- Install and commission industrial X-ray inspection systems at customer sites.
- Perform system setup including beam alignment, geometric calibration, and detector integration.
- Commission microfocus open-tube X-ray systems, including tube conditioning and vacuum validation.
- Configure imaging software and integrate detectors and CT acquisition systems.
- Conduct Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
Preventive & Corrective Maintenance
- Perform preventive maintenance and repairs on:
- Microfocus open-tube X-ray sources
- High-voltage X-ray generators and associated electronics
- Industrial linear accelerator (LINAC) systems
- Service supporting subsystems including:
- High-voltage power supplies
- Cooling systems
- Vacuum pumps and vacuum hardware
- Motion systems and manipulators
- Diagnose issues such as arcing, beam instability, focal spot drift, vacuum failures, and HV breakdown.
Troubleshooting & Diagnostics
- Troubleshoot high-voltage, control, and electromechanical subsystems.
- Diagnose faults in motion stages, manipulators, and CT scanning systems.
- Use diagnostic equipment including oscilloscopes, digital multimeters, and system diagnostic software.
- Perform root cause analysis and implement corrective actions.
- Provide remote technical support to customers when required.
Radiation Safety & Compliance
- Ensure systems operate in compliance with applicable radiation safety regulations.
- Perform radiation surveys, leakage testing, and safety interlock verification.
- Support regulatory inspections and documentation as required.
Customer Support
- Provide technical support to customers via phone, email, and on-site service.
- Train operators and maintenance personnel on proper system operation.
- Maintain service documentation and reports.
- Support system upgrades, retrofits, and ongoing customer relationships.
Essential Skills:
- Bachelor’s degree in Electrical Engineering, Electronics Engineering, Mechatronics, Applied Physics or related technical field.
- Minimum of five (5) years of experience servicing and working with industrial x-ray systems, high-voltage systems and/or vacuum technology.
- Experience working with one or more of the following:
- Microfocus X-ray sources
- High-voltage generators (90kV–450kV typical)
- Industrial linear accelerator (LINAC) systems
- Ability to read and interpret electrical schematics and technical drawings.
- Familiarity working with precision electro-mechanical equipment
- Experience using diagnostic tools such as oscilloscopes and digital multimeters.
- Knowledge of radiation safety practices and regulatory compliance.
- Ability to travel up to 50%, including international travel.
- Excellent interpersonal skills with well-established written and verbal communication skills
- Conversant with Microsoft Word, Excel & PowerPoint
- Ability to work in a fast-paced dynamic environment, capable of prioritization, multi-tasking, and effective organization.
- Must be a US citizen and able to pass personal background and security checks to obtain clearance on various government and military sites
- Will need to successfully pass a drug test and present a clean and valid driver’s license
Non-Essential Skills:
- Experience servicing NDT, DR, or CT inspection systems.
- Familiarity with vacuum systems (turbo pumps, roughing pumps).
- Experience with motion control systems or industrial automation.
- Familiarity with CE, UL, and regulatory compliance processes.
- Experience with LINAC RF or accelerator systems.
- Microcontroller or embedded systems troubleshooting experience.
- Prior soldering experience
- Basic understanding of an MRP or ERP system
- Regularly required to sit, walk, bend and stand in industrial, field and office environments.
- Domestic and International travel via air, rail and car.
- Will be required to lift, move, erect, install and assemble components of varying weight (minimum of 55 lbs), height, length and width dimensions.
- Expected to effectively communicate in person, on phone, and via email and other electronic devices on a continual and repetitive basis.
- Will need to repeatedly use hands to finger, handle, feel and operate hand tools, power tools and standard office equipment.
- Comfortable working around high-voltage and radiation-generating equipment.
- Will need manual dexterity to be able to complete required system and component cabling and wiring
- Specific vision abilities required include close vision, distance vision and the Must be able to fulfill essential job function in a consistent state of alertness and safe manner
This position has been deemed a Safety Sensitive position. The responsibilities and skills noted within this job description are not all inclusive and are subject to change.
EEO/AAP/VETs
Skills Required
- Bachelor’s degree in Electrical Engineering, Electronics Engineering, Mechatronics, Applied Physics, or a related technical field
- At least five years of experience servicing or working with industrial X-ray systems, high-voltage systems, and/or vacuum technology
- Experience with microfocus X-ray sources, high-voltage generators, or industrial LINAC systems
- Ability to read and interpret electrical schematics and technical drawings
- Experience working with precision electromechanical equipment
- Experience using oscilloscopes and digital multimeters
- Knowledge of radiation safety practices and regulatory compliance
- Ability to travel up to 50%, including internationally
- Strong written, verbal, and interpersonal communication skills
- Proficiency with Microsoft Word, Excel, and PowerPoint
- Ability to prioritize, multitask, organize work, and operate effectively in a fast-paced environment
- Must be a U.S. citizen and able to pass background and security checks to obtain clearance for government and military sites
- Successful completion of a drug test
- Clean and valid driver’s license
- Experience servicing NDT, DR, or CT inspection systems
- Familiarity with turbo pumps, roughing pumps, and other vacuum systems
- Experience with motion control systems or industrial automation
- Familiarity with CE, UL, and regulatory compliance processes
- Experience with LINAC RF or accelerator systems
- Microcontroller or embedded systems troubleshooting experience
- Prior soldering experience
- Basic understanding of MRP or ERP systems
Am I A Good Fit?
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.
Success! Refresh the page to see how your skills align with this role.
The Company
What We Do
VJ Technologies designs and supplies digital radiography and computed tomography X-ray inspection systems and solutions for industries including aerospace, automotive, food, and nuclear. Its imaging equipment supports radioscopic inspection of products and assemblies to identify defects or foreign matter, helping customers reduce costs and inspection time while improving product quality and safety. The company also develops non-destructive testing solutions for industrial applications.
