Electrical Engineer II

Posted Yesterday
Be an Early Applicant
Prescott, AZ, USA
In-Office
Entry level
Aerospace
The Role
Designs, integrates, verifies, qualifies, and sustains airborne communication and control electronics. Responsibilities include circuit analysis, component selection, schematic and documentation development, laboratory testing, troubleshooting, root-cause analysis, EMC and environmental qualification, manufacturing support, configuration management, and coordination with engineering, suppliers, customers, and cross-functional teams.
Summary Generated by Built In

Electrical Engineer II

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.

 

Canyon AeroConnect stands as one of the world’s leading suppliers of avionic-standard aircraft communications, navigation and audio/intercom systems. Canyon’s products have been widely adopted and proven in-service across a wide range of civilian, paramilitary and military fixed-wing and rotorcraft applications. Over the years, we’ve become known as the benchmark in aircraft tactical communication and audio equipment for Air Ambulance, Law Enforcement, SAR, EMS, Electronic News Gathering, Military and Marine applications. Products include digital and analog radio/audio management systems, Tac/Com, VHF/UHF radio systems, intercoms, data interface accessories, and aural warning.  

Role purpose (position scope):

The Electrical Engineer supports the design, development, integration, verification, qualification, production, and sustaining engineering of airborne communication and control electronics within the Radio Business Unit. The position works cross-functionally with RF, software, systems, mechanical, manufacturing, test, quality, and supply chain teams to deliver reliable, configuration-controlled products and technically sound evidence for customer and regulatory requirements.


Key Responsibilities

  • Design and maintain electronic assemblies, schematic designs, circuit interfaces, wiring/interconnects, and supporting engineering drawings for airborne radio and control products.
  • Perform circuit-level analysis, component selection, derating, power-budget assessment, signal integrity evaluation, and troubleshooting of analog/digital and power-distribution functions.
  • Develop or support engineering requirements, design documentation, interface definitions, test procedures, and requirements-to-verification traceability.
  • Plan and execute bench verification and design characterization using oscilloscopes, DMMs, electronic loads, power supplies, spectrum analyzers, network analyzers, and automated test systems as appropriate.
  • Investigate anomalies and field/production failures through structured root-cause analysis, controlled experiments, data evaluation, and documented corrective actions.
  • Support environmental and EMC qualification activities, including preparation, testing, discrepancy resolution, and objective-evidence packages to applicable program requirements (e.g., DO-160 and other contractual standards).
  • Partner with Manufacturing and Test Engineering to improve production testability, work instructions, acceptance criteria, first-pass yield, reliability, and transition of designs into repeatable manufacture.
  • Participate in engineering change control, configuration management, supplier technical reviews, obsolescence mitigation, and sustaining-engineering activities.
  • Coordinate technical deliverables with internal teams, suppliers, and customers; communicate risks, dependencies, verification status, and recovery actions clearly.

Required Qualifications

  • Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related engineering discipline; equivalent relevant experience may be considered under company policy.
  • Practical experience with electronic hardware design, integration, debugging, and laboratory verification.
  • Ability to interpret schematics, assembly drawings, specifications, test data, and component datasheets.
  • Working understanding of analog and digital circuits, interfaces, basic RF concepts, power electronics, and PCB manufacturing constraints.
  • Strong technical writing, problem-solving, prioritization, and collaboration skills.

Preferred Qualifications

  • Experience with airborne radios, avionics, embedded systems, or safety/mission-critical electronics.
  • Familiarity with DO-160, MIL-STD-461, AS9100, IPC workmanship standards, or similar qualification and manufacturing frameworks.
  • Experience with Altium, OrCAD, Cadence, or comparable ECAD tools; Jira/SVN or other engineering configuration tools.
  • Experience with automated test equipment, Python/LabVIEW or other instrumentation automation, and structured statistical analysis.
  • Knowledge of failure analysis, DFMEA/PFMEA, design-for-test, design-for-manufacture, and supplier technical investigations.

Measures of Success

  • Timely completion of assigned design and verification deliverables with traceable evidence.
  • Effective closure of technical investigations and reduction in repeat production or field failures.
  • Improved test coverage, production yield, and engineering-change execution with controlled documentation.
  • Clear communication and proactive resolution of technical risks and cross-functional dependencies.

Role Expectations and Working Conditions

Collaborates across engineering, manufacturing, test, quality, supply chain, program management, and external technical stakeholders. Work is primarily office/laboratory based with occasional factory-floor activity and potential program-related travel. Must follow site safety, ESD, quality, document-control, and information-security procedures.


----

This job description is not intended to be all inclusive of every job function, duty and responsibility. Duties may increase, decrease and/or change as deemed necessary to support the department operations.

Canyon AeroConnect is an Equal Opportunity Employer and federal contractor committed to affirmative action. We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, protected veteran status, genetic information, or any other characteristic protected by applicable law.

 

As a federal contractor, we take affirmative action to employ and advance in employment qualified individuals with disabilities and protected veterans. This position is being listed in accordance with federal contractor obligations under 41 CFR 60-300 and 41 CFR 60-741.

 

If you require reasonable accommodation to complete the application process, participate in the interview process, or perform essential job functions, please contact Human Resources at [email protected] or 928-708-1550.


Skills Required

  • Bachelor's degree in Electrical Engineering, Electronics Engineering, or a related engineering discipline; equivalent relevant experience may be considered.
  • Practical experience with electronic hardware design, integration, debugging, and laboratory verification.
  • Ability to interpret schematics, assembly drawings, specifications, test data, and component datasheets.
  • Working understanding of analog and digital circuits, interfaces, basic RF concepts, power electronics, and PCB manufacturing constraints.
  • Strong technical writing, problem-solving, prioritization, and collaboration skills.
  • Experience with airborne radios, avionics, embedded systems, or safety- and mission-critical electronics.
  • Familiarity with DO-160, MIL-STD-461, AS9100, IPC workmanship standards, or similar qualification and manufacturing frameworks.
  • Experience with Altium, OrCAD, Cadence, or comparable ECAD tools; Jira, SVN, or other engineering configuration tools.
  • Experience with automated test equipment, Python, LabVIEW, instrumentation automation, and structured statistical analysis.
  • Knowledge of failure analysis, DFMEA/PFMEA, design-for-test, design-for-manufacture, and supplier technical investigations.
  • US Person status as defined by 22 C.F.R. § 120.15, including US citizen, lawful permanent resident, refugee, or asylee.
Am I A Good Fit?
beta
Get Personalized Job Insights.
Our AI-powered fit analysis compares your resume with a job listing so you know if your skills & experience align.

The Company
93 Employees
Year Founded: 1970

What We Do

Canyon AeroConnect supplies avionic-standard communications, navigation, and audio/intercom systems for fixed-wing aircraft and rotorcraft. Its product range includes digital and analog radio/audio management systems, tactical and VHF/UHF radios, intercoms, data-interface accessories, and aural warning generators. The company serves civilian, paramilitary, and military missions, including air ambulance, law enforcement, search and rescue, emergency medical services, electronic news gathering, and marine applications.

Similar Jobs

Northrop Grumman Logo Northrop Grumman

Electrical Engineer

Aerospace • Logistics • Security • Software • Cybersecurity
In-Office
Chandler, AZ, USA
85636 Employees
77K-116K Annually
In-Office
14 Locations
926 Employees
80K-161K Annually

Axon Logo Axon

Electrical Engineer

Artificial Intelligence • Cloud • Social Impact • Software • Wearables
In-Office
Scottsdale, AZ, USA
2700 Employees
In-Office or Remote
2 Locations
1745 Employees

Similar Companies Hiring

Rangeview Thumbnail
Aerospace • Robotics • Energy • Defense • Manufacturing • Weapons Systems
El Segundo, California
38 Employees
Outpost Space Thumbnail
Aerospace • Defense
Los Angeles, California
38 Employees
Revel Thumbnail
Aerospace • Hardware • Robotics • Software
Marina Del Rey, California
70 Employees

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account